Bulky Case for Apple TV Siri Remote
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For Apple TV 4K 2nd Gen or of 3rd Gen
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
While the Siri Remotes for the Apple TV 4K (2nd or 3rd Gen) look slick, I prefer something a bit more bulky. It's easier to hold in your hand, and it's less likely to disappear down the gap in the couch 🙂
This design for a case features a flat bottom. so the remote rests solidly on the table. It has a cutout in the rear that worked with all the USB-C cables I tried. There's a cutout on the right side for the Siri button—which I for one have never ever used.
Printing
This model is designed to be printed with TPU. I did not try to print it with any other material, and I don't know if the remote would remain properly in the case; try at your own risk.
To optimize appearance, I printed it upside down, with PLA as supports, on a Prusa INDX. I don't see a reason why it wouldn't print on other multi-material printers, such as a Prusa XL, Snapmaker, etc.
See attached Prusaslicer 3mf file for my recommended settings. Basically 0.2mm layer height, 15% cubic infill, 2 perimeters. 0mm top contact distance for snug supports.
If you like what I'm doing…
… consider buying me a coffee or joining my Printables Club