Avantage arms magazine spring bender (conversion kit for glock to .22)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Avantage arms magazine spring bender
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Avantage arms magazine spring bender (conversion kit for glock to .22)
Push the spring threw the hole about 4mm and bend at a 120 degree (to hold it in place under tension).
The key is to hold the same tension as you move your hand down the tool. I have made a few 0.20" wire springs using PLA with no issue, but PETG would be better.
v4 works but is a about 0.6mm smaller OD then OEM, v5 should fix that but I haven't tested it yet.
The tool holder is untested but will help hold it in place(I will be printing it when I have time).
You should use gloves and safety glasses when making springs(bleeding is part of making springs)
this is for my magazine