Avantage arms magazine spring bender (conversion kit for glock to .22)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Avantage arms magazine spring bender
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 72
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Avantage arms magazine spring bender (conversion kit for glock to .22)
Push the spring threw the hole about 4mm and bend at a 120 degree (to hold it in place under tension).
The key is to hold the same tension as you move your hand down the tool. I have made a few 0.20" wire springs using PLA with no issue, but PETG would be better.
v4 works but is a about 0.6mm smaller OD then OEM, v5 should fix that but I haven't tested it yet.
The tool holder is untested but will help hold it in place(I will be printing it when I have time).
You should use gloves and safety glasses when making springs(bleeding is part of making springs)
this is for my magazine