Teenage Engineering EP-133 KOII sampler - mounting plate for drum machine stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mounting plate allows you to click your KOII securely onto a drum machine stand.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I had a drum machine stand that I wasn't using - the kind you'd mount an Octapad on. It has a plate with 4 M6 holes. I figured I could use it very nicely for my KOII sampler.
This is the kind of stand:
https://amzn.eu/d/00D59KOk
I printed in PETG and it clicks in very securely - so securely I added the hole to make it easier to remove!
You need 4 x M6 18mm countersunk bolts, and 4 x M6 wingnuts (or screw knobs like I used)
I haven't printed in PLA, but beware that PLA is more likely to crack on flexing, so may not last long.
I was wondering about modifying it slightly to provide clips/supports for cables, but i'll see if anyone actually is interested first!
Update:
I added a V2 with holes to make it easier to remove the KO2 from the cradle.
Update:
V3 has a few improvements:
- smaller knubs for a less aggressive grip
- slightly raised sides
- reinforced flanges to help with release
- shorter depth which allows you to grip the edge of the KO2 when you release it.
- less material and faster print time (around 2 and half hours)