Teenage Engineering EP-133 KOII sampler - mounting plate for drum machine stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mounting plate allows you to click your KOII securely onto a drum machine stand.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I had a drum machine stand that I wasn't using - the kind you'd mount an Octapad on. It has a plate with 4 M6 holes. I figured I could use it very nicely for my KOII sampler.
This is the kind of stand:
https://amzn.eu/d/00D59KOk
I printed in PETG and it clicks in very securely - so securely I added the hole to make it easier to remove!
You need 4 x M6 18mm countersunk bolts, and 4 x M6 wingnuts (or screw knobs like I used)
I haven't printed in PLA, but beware that PLA is more likely to crack on flexing, so may not last long.
I was wondering about modifying it slightly to provide clips/supports for cables, but i'll see if anyone actually is interested first!
Update:
I added a V2 with holes to make it easier to remove the KO2 from the cradle.
Update:
V3 has a few improvements:
- smaller knubs for a less aggressive grip
- slightly raised sides
- reinforced flanges to help with release
- shorter depth which allows you to grip the edge of the KO2 when you release it.
- less material and faster print time (around 2 and half hours)