Spinning Top with Screw-In Tip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fun, easy-to-print spinning top with a screw-in tip. No supports and no glue required.
- Ocena
- 5 / 5
- Polubienia
- 63
- Pobrania
- 413
- Wydruki
- 1
- Wyświetlenia
- 1140
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
This model is one from my extensive Children's Toys Collection.
A simple and fun spinning top designed for easy and completely support-free printing.
The large outer ring provides plenty of rotational mass, while the shaped handle makes it easy to give the spinner a good twist with two fingers– allowing spin times of more than one minute on a smooth surface.
To make the entire model printable without supports, the tip is printed as a separate part. It features a threaded connection and simply screws into the bottom of the spinner – no glue required.
A hexagonal section on the tip allows it to be tightened securely using a 12 mm open-end wrench.
Note About the Pictures
The preview images were created with the help of AI for presentation purposes only.
Printing Information
The STL files are correctly aligned.
Layer height: 0.2 mm
Perimeters: 4
Infill: 15 % Gyroid
Supports: no
Brim: recommended for Spinning_Top_Tip
Assembly
Screw the selected tip into the bottom of the spinner by hand. For secure fastening, use a 12 mm open-end wrench on the hexagonal section of the tip.
Do not overtighten – a snug fit is sufficient for the printed thread.
I am looking forward to your Makes! :-)
If you like this design, feel free to check out my others here.