Spinning Top with Screw-In Tip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fun, easy-to-print spinning top with a screw-in tip. No supports and no glue required.
- Rating
- 5 / 5
- Likes
- 63
- Downloads
- 414
- Makes
- 1
- Views
- 1,148
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
This model is one from my extensive Children's Toys Collection.
A simple and fun spinning top designed for easy and completely support-free printing.
The large outer ring provides plenty of rotational mass, while the shaped handle makes it easy to give the spinner a good twist with two fingers– allowing spin times of more than one minute on a smooth surface.
To make the entire model printable without supports, the tip is printed as a separate part. It features a threaded connection and simply screws into the bottom of the spinner – no glue required.
A hexagonal section on the tip allows it to be tightened securely using a 12 mm open-end wrench.
Note About the Pictures
The preview images were created with the help of AI for presentation purposes only.
Printing Information
The STL files are correctly aligned.
Layer height: 0.2 mm
Perimeters: 4
Infill: 15 % Gyroid
Supports: no
Brim: recommended for Spinning_Top_Tip
Assembly
Screw the selected tip into the bottom of the spinner by hand. For secure fastening, use a 12 mm open-end wrench on the hexagonal section of the tip.
Do not overtighten – a snug fit is sufficient for the printed thread.
I am looking forward to your Makes! :-)
If you like this design, feel free to check out my others here.