Simple test cube (Multiple tests)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple test cube, that will test your printer for multiple tests.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 39
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
This is a simple test cube I made, that will test your printer for multiple tests.
Dimensions - The outer dimensions are 30 x 30 x 30 mm, and the inner dimensions are 10 mm, which gives you several dimensions to test your printer for.
Overhang - The upper part will test your printer for overhang, to see if it manages to print it properly.
Bulging corners - Test how your printer performs when printing corners. My printer performed poorly on the 30 x 30 mm dimensions, but printed the corners fine on the 10 x 10 mm dimensions.
As you can see from the pictures, my printer needs adjusting because the dimensions are either too wide or too narrow, and it performs poorly on the overhangs and bulging corners.
Print settings:
Supports: None