Mecha Camel - Print-in-Place Articulated Dromedary (Neck Holds Its Pose)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One-piece mecha dromedary: 6-joint neck with hidden stops holds a real camel pose. No supports, fits A1 mini.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A mecha dromedary resting in the classic couched pose, printed in one piece with every joint already assembled. Six neck vertebrae, a hinged head and a two-part tail move freely straight off the build plate. Hex armour panels on the hump, rivets, and a droopy camel lip.
The trick: the neck holds its own pose
Most print-in-place animals go limp: put them down and the neck drops to the table. Here every neck joint has a hidden stop (two radial pads under the joint). Gravity lowers the neck onto the stops and it settles into the dromedary's S-curve, head above the hump.
Lift the head and every joint bends up freely (+25° each). Let go and it settles back into the same pose.
It prints with the neck 6° higher at every joint, so the stops have 0.55 mm of clearance and cannot fuse.
How it was checked
Collision tests in CAD (build123d): no part touches another in the print pose or at rest; 1° below the rest pose all 7 stops are in contact, so the neck cannot drop further; no collisions with each neck joint and the head swept from its stop to +25°, all joints +8° at once, or the tail swinging back.
Gravity check: at rest the weight of the neck and head pushes every joint onto its stop (torque computed from the real part volumes).
Stability: centre of mass at the middle of the belly, so it sits without tipping forward; 16 mm thick.
Hinges are the same 0.4 mm clearance pin-and-tongue joints as my print-in-place dragon.
Print settings
One piece, lying on its side, no supports: 151 × 108 × 16 mm, fits the A1 mini. 1 h 59 min, 56 g of PLA at 0.2 mm (3MF included). After printing, flex each joint gently a few times to free it.
Parametric source included (Python / build123d): neck length, rest curve and stop angles are variables, and the script re-runs all the checks above.
About this design
Designed with AI assistance and checked in code before release (see above). Pictures are 3D renders, not photos. Not printed yet: makes and feedback are very welcome.
Español
Dromedario mecha echado, impreso de una pieza con todas las articulaciones montadas: 6 vértebras de cuello, cabeza y cola. Cada articulación del cuello tiene un tope oculto, así que por su peso el cuello se queda en la curva de camello en lugar de caer. Sin soportes, cabe en el A1 mini.
العربية
جمل آلي بارك، يطبع قطعة واحدة بمفاصل جاهزة: ست فقرات في الرقبة ورأس وذيل. لكل مفصل في الرقبة مصد خفي، فتبقى الرقبة في انحناءة الجمل ولا تسقط.