Liczymy pasujące modele…
A camel I made for use in a nativity scene. Check out the wise men. The Three Magi / Wise Men by Peter Farell | Download free STL model | Printables.com
Wydruk około 6,54 €–8,00 € nettoWstępna wycena jednego wariantu
Carousel camel. Use tree supports on build plate only.
Water Bottle Car Cup Holder Adapter designed for Camelbak Chute 32 oz. Will fit water bottles up to 9.5 cm in diameter (ideally larger than 8.75 cm). Print with support for overhangs or slice into 2 pieces to attach with screws. Planning…
I have no desire for short biketours to fill the Camelbak and then elaborately clean and dry. Therefore, I have made this closure so that you can use normal PET bottles (or for those who do not have a Camelbak). The tubes of the Camelbak…
Meet the fluffiest traveler in the Sahara… who refuses to travel. This laid-back, two-humped camel just wants to sit, vibe, and judge your hydration habits. The wavy coat prints beautifully, the face has loads of character, and those…
Bring a touch of desert charm to your decor with this 3D printable STL model of a Ceramic Camel Ornament Set. These decorative ornaments are perfect for adding a unique and stylish touch to shelves, desks, or as distinctive decorative…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
In addition to a new look, the doors will also protect the model from scratches. It's best to use PLA filament.
Card tray for holding the melee, godsend, and character cards. Token tray for tokens and health cards.
This detailed pack camel model captures the rugged reliability of a desert caravan companion. Fitted with layered saddle armour and fully loaded with travel packs, bedrolls, and secured cargo, the sculpt brings strong storytelling…
This is a replacement Gasket/Sealing Ring for the often lost/misplaced CamelBak Eddy Water Bottle Lids. Print slow in TPU for best results.
A new 3D figurine generated by AI, a Cute Chibi Camel. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
A decorative camellia wall art model designed for clean and easy 3D printing. This piece is part of my Sacred Flowers Collection, a series of stylized floral wall art designs created for modern home and workspace decoration. The model…
Meet the Camel , your new favorite desk companion from the sands of the desert. 🐪✨ This adorable articulated camel sits in a relaxed, resting pose with fully flexi joints running through its body and legs. Every segment moves…
A Camellia flower that is not quite a lithophane but not fully 3D either but makes a perfect gift for your mother or sweetheart (or your own window). I used 3DP.Rocks ' Lithophane generator ( http://3dp.rocks/lithophane/ ) on an image I…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Material TPU If you like it you can buy me a coffe https://buycoffee.to/krisogr
Here is the Baby Version of my Articulated Camel modelled after the dromedary camel. This small print-in-place model (without supports) results in a cute camel with 10 flexible joints. A keychain version is included for a stylish and fun…
>> This insert has been completely redesigned to fit all components without any lid lift and better organisation for easier setup/teardown - the new version is only available on Cults3d, head over and search for 'mini manatee' or 'shadows…
Water Bottle Car Cup Holder Adapter designed for Camelbak Chute 32 oz. Will fit water bottles up to 9.5 cm in diameter (ideally larger than 8.75 cm). Print with support for overhangs or slice into 2 pieces to attach with screws. Planning…
This custom mount is designed to securely hold your Camelback bottle on the side of a Tasmanian Tiger TT Modular Pack 30, allowing for easy access during hiking, cycling, or outdoor adventures. The mount is designed to fit snugly using…
This support arm is intended to be used with the original base and stem from Divideby0 and to fit a 3.0L Camelbak bladder without resting weight on the inner/center bladder support. I printed in PLA following the manufacture's print…
Clear, step-by-step instructions for replacing front and rear wheel bearings on the Bugaboo Cameleon 3 stroller. Includes parts, tools, and assembly steps. Bill of Materials (BOM): Front Wheels: 608-2RS ball bearings – 4 pcs (2/wheel)…
Expands the CamelBak bladder for drying and hook to hand. Verified on the 1.5L bladder
The original clip on my Osprey broke, so I designed this new replacement part for the clip to hold the water hose for the Osprey Camelbak. The magnet hole is 12.5mm
A figurine of a camel for educational purposes. It does need full support (we used 25 degree overhang threshold with automatic tree/organic supports with great success). Filaments used- Polymaker Polylite Pro PLA in Army Beige and Brown
The magnetic tube clip is a simple magnetic tube holder, easily attachable to your backpack strap, shoulder strap or whatever else, allowing complete ease of use. The use itself is pretty self-explanatory. Works for bare tubes only. Print…
I hope you are enjoying some Camel Up it is a great family/group game. As you play you will probably find you need a higher denomination coin. This is a 10 Egyptian Pound coin that matches the design of 1s and 5s. It should print with no…
The 32oz CamelBak Eddy+ insulated water bottle does not fit in some car cup holders, so this adapter sits in the cup holder and fits the water bottle on top. The cup holder part is 71.8mm in diameter at the bottom, sloping up to 83mm at…
Seal for hose used in hydration pack from Naturehike. Lost my seal and created replacement which is tested to hold water with no leak. Used TPU 95a but softer would be probably better.
Dryer spacer for Camelbak or similar water/dromedary bag. Don't like your bags get slimy and moldy!
Description from original author post: I am in the process of painting the miniatures for this game. The insert is a pretty good one, however the minis come all bundled into one compartment, which, I fear, may lead to chipping and…
Hello, Welcome to my profile, full of models and miniatures :-) I have a Cute Bactrian Camel for you, maybe for a diorama, or just for the play. Very nice animals. It is suitable for coloring. My children absolutely love it :-).…
Perfect toy for your kids when playing with shadows. Simply yous any kind of light to produce the shadow kids will love.
DJ Reference Camelot Wheel for Mixing Keys "This is the Camelot Wheel. Each musical key is represented by a number and letter combination. The outer ring has Major Chords, while the inner ring shows Minor Chords. The Camelot Wheel system…
A Camel standing on a pedestal. Use tree supports on build plate only.
Adherable Camelot Wheel Plate for DJ Controllers Every DJ knows the painful sound of two songs melodically clashing even though they are lined up perfectly. The Camelot Wheel, created by Mark Davis in 1991, simplifies "Harmonic Mixing" by…
Marrakesh Board Game Organizer This organizer is designed to store the following versions: Marrakesh: Essential Edition – English edition (2023) Marrakesh: Camels & Nomads – EN/FR/DE edition (2023) Since it is not possible to store all…
Shameless ripoff of Camelbak's Mud Cap for podium bottles. Save $ and print it yourself! Designed for TPU. No supports needed
Simple print. It prints well in the orientation it is already in. Best if printed in TPU or a rubber material. The softer the better Use a hobby knife to cut the slit. Go slow or you might make it too large. May fit other brands or…
✅ little support material is needed if you lay it flat on the print bed. ✅ Layer height of 0.2 mm is sufficient for a clean look. ✅ PLA is great, but it looks even more classy with matt or semi-gloss filament!
What is it with dangly hoses for water packs. Most inconvenient. Solution? Create a hose guide. Now I just tilt my head forward and take a sip. No hands required. Let me know if you want a different angle or other feature.
A carved wood camel sculpture. Tree supports are EZ to remove, get the whole collection! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
A hand carved toy depicting a camel. Tree supports come off easily. Brims recommended. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
I Printed mine with supports but on a better printer, it should be possible without supports. It's designed for a 10mm tube and a 4mm carabiner. This model features an additional grove for a 3mm cable tie.
Bottle cage designed to fit a 750ml Camelbak water bottle. It's a bit oversized for biking, but it's what I had available. Should fit other similarly sized water bottles - but keep in mind that the design is primarily static. Includes a…
During shooting competitions I want to stay hydrated but the amount of space you have to put things down on a range is usually limited. So I made this ring because I didn't want to store my bottle in the same compartment as my magazines…
THE MODELS I PRINTED ARE AT 250% SCALE. BEWARE THE TINY PRINT. This is a model of a Minecraft camel that I designed myself. Any filament besides stretchy filament should work with this, but I think PETG will work the best. The filament I…
Flexi camel je hračka, kterou lze využít jak pro malé děti tak pro školáky. Slouží k odreagování a volné zábavě.
Landy Camel Trophy fog lights glass cover, its deeper to accommodate 5mm leds. Still need some glue to hold in place.
It is a camel character with the torso of the refrigerator wearing shoes. A cold wind comes out of your mouth. Sometimes it is frozen. Although it is a refrigerator to avoid the heat of the desert, the world is wandering around the world,…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
I provide two versions, one with the possibility of securing the tube with a rubber band such as an o-ring seal, and the other a simple simplified version.
Printed on Elegoo Neptune 4 with PLA Plus. 0.2mm layer height. Might make some quality of life updates to this project in the future, as well as some variations to the design on the box.
I have no desire for short biketours to fill the Camelbak and then elaborately clean and dry. Therefore, I have made this closure so that you can use normal PET bottles (or for those who do not have a Camelbak). The tubes of the Camelbak…
I designed this thin, lightweight ring to fit securely under the cap of a Camelbak Podium bottle without affecting the seal. The bottle remains fully leak-proof, even with the ring installed. Perfect for attaching a carabiner, I use it…
🖼 Modern Wall Art – Dein 3D-Highlight für die Wand! 🎨 Verwandle deine Wände in echte Hingucker! Diese stilvolle 3D-Wall Art kombiniert modernes Design mit der Magie des 3D-Drucks ✨ Ob Wohnzimmer, Büro, Schlafzimmer oder Flur – dieses…
Smoothed out the edge on the back of the camel and increased the stl resolution. Also added some printable dice stickers. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: No Resolution: 0.1…
Camelbak PET bottle refill adapter For faster reffil from bottle Use 6x2mm o-ring Print settings 0.1mm layer 8 walls 50%infill Use manual supports and paint supports only for upper part overhangs
A great Wall Art of a camel. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used Flux.1 AI, Copilot and Hotpot
A great Wall Art of a camel. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used Flux.1 AI, Copilot and Hotpot
Frigo camelo generated with AI Image used for generate 3d model added in picture gallery Background of image removed with: Adobe lightroom / You can also use Microsoft image editor, which have implemented automatic background remover Ai…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
I modified the front bumper from the original Landy by 3D sets to suit a proper camel trophy truck. it fits directly on the Landy model without modification for the ultimate "expedition look". I printed it in PETG 0,2 mm 15% infill. you…
An adapter to attach a cheap USB-powered fan to dry an older Camelbak bladder using standard 20-410 bottle threads. It will blow air out through the tube inserted into the Camelbak and dry it from the inside. The Blower Adapter fits…
A hook and and a "spreader" to help you dry your 3l CamelBak bladder. This is a remix of theRatchets excellent design for 1.5l bladders - thanks for sharing the .f3d. I made hook and spreader and bit larger so that it fits better for my…
I need a camelbak hydration tube clip base for 2nd backpack. 12.7mm x 2mm round magnet
Camel Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Made this Frigo Camello inspired by the game steal a brainrot on tinkercad, Also made Tralalero Tralala and Im in process of doing Los Tralaleritos
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Meet the fluffiest traveler in the Sahara… who refuses to travel. This laid-back, two-humped camel just wants to sit, vibe, and judge your hydration habits. The wavy coat prints beautifully, the face has loads of character, and those…
Bring a touch of desert charm to your decor with this 3D printable STL model of a Ceramic Camel Ornament Set. These decorative ornaments are perfect for adding a unique and stylish touch to shelves, desks, or as distinctive decorative…
Bring a touch of desert charm to your decor with this 3D printable STL model of a Ceramic Camel Ornament Set. These decorative ornaments are perfect for adding a unique and stylish touch to shelves, desks, or as distinctive decorative…
Re-modelled in Fusion 360 so I could rescale it to my needs. Category: Sport & Outdoors
3D-i-fied camel trophy logo. Just the right size to cover the "traxxas trophy" stickers on the TRX-4 trophy edition. Just use some sticky tape to attach. Print Settings Printer Brand: Zortrax Printer: M200 Rafts: Doesn't Matter Supports:…
Stylized camel with simplified humps and a polygonal, minimalist silhouette.
Simple dispenser for Camel for Ploom cigarettes. Printable without supports.
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
