1 / 1
Ford Transit Mk7 Can Holder – No Rattle, Easy Grip (+ Slim Can Adapter) — zdjęcie 1

Ford Transit Mk7 Can Holder – No Rattle, Easy Grip (+ Slim Can Adapter)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Drop-in insert for the factory cup holder in the Ford Transit Mk7 (2006–2014). Holds 330/500 ml cans

Ocena
0 / 5
Polubienia
3
Pobrania
21
Wydruki
0
Wyświetlenia
92
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

The factory cup holder in the Transit Mk7 is too wide for a regular can, so your drink slides around and rattles on every corner. This insert drops straight into the original holder and keeps cans and bottles upright and quiet.

Features

  • Drops into the factory cup holder. No drilling, no glue, fully removable.

  • Crush ribs on the outside: the insert sits tight in the holder and doesn't rattle.

  • Inner ribs keep the can from wobbling side to side.

  • Finger cutouts make it easy to grab your drink.

  • Chamfered top edge so the can slides in easily.

  • Bonus: a slim can adapter for 250 ml cans (Red Bull, slim energy drinks). It drops into the main insert.

Fits

  • Ford Transit Mk7 (2006–2014)

  • Standard 330 ml and 500 ml cans (Ø66 mm), 0.5 l bottles

  • Slim 250 ml cans with the adapter

Print settings

  • Material: ASA recommended (the dashboard gets hot in summer). PETG also works. Avoid PLA, because it will warp in a hot car.

  • Layer height: 0.2 mm

  • Walls: 3–4

  • Infill: 20% gyroid

  • Supports: none needed

  • Orientation: as provided, bottom on the bed

Fit tuning
If it's too loose or too tight in your holder, scale X/Y by ±1% in your slicer.

Made by SicxProjects. If you print one, post a make. I'd love to see it in your van! 🚐

Tagi