Ford Transit Mk7 Can Holder – No Rattle, Easy Grip (+ Slim Can Adapter)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drop-in insert for the factory cup holder in the Ford Transit Mk7 (2006–2014). Holds 330/500 ml cans
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
The factory cup holder in the Transit Mk7 is too wide for a regular can, so your drink slides around and rattles on every corner. This insert drops straight into the original holder and keeps cans and bottles upright and quiet.
Features
Drops into the factory cup holder. No drilling, no glue, fully removable.
Crush ribs on the outside: the insert sits tight in the holder and doesn't rattle.
Inner ribs keep the can from wobbling side to side.
Finger cutouts make it easy to grab your drink.
Chamfered top edge so the can slides in easily.
Bonus: a slim can adapter for 250 ml cans (Red Bull, slim energy drinks). It drops into the main insert.
Fits
Ford Transit Mk7 (2006–2014)
Standard 330 ml and 500 ml cans (Ø66 mm), 0.5 l bottles
Slim 250 ml cans with the adapter
Print settings
Material: ASA recommended (the dashboard gets hot in summer). PETG also works. Avoid PLA, because it will warp in a hot car.
Layer height: 0.2 mm
Walls: 3–4
Infill: 20% gyroid
Supports: none needed
Orientation: as provided, bottom on the bed
Fit tuning
If it's too loose or too tight in your holder, scale X/Y by ±1% in your slicer.
Made by SicxProjects. If you print one, post a make. I'd love to see it in your van! 🚐