1 / 6
Neopren Dryer — zdjęcie 1
1 / 6

Neopren Dryer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This dryer is designed to shorten drying times of neopren wetsuites and boots by constantly blowing air.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
21
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This model is designed to dry a neoprene wetsuit faster.
It uses a 80mm computer fan to push air into the wetsuit. The circulating air results in quicker dry times.
The sideopening controls if air can exit through the blower or has to go through the wetsuit.
Two cones of different sizes allow the blower to be put into different sized wet gear. If the gear does not stay put use a bungee cord to fixate.

Be careful with choosing the electronics. The wetsuite might drip water onto the fan creating an electrical short.

I recommend using a powerbank and usb powered fans for portability.

Item

Placement

Sideslots

Wetsuit

One in arm, One in a leg

closed to push air through wetsuit

Gloves/Shoes

One 

Open to allow air to vent

3m screws are required for assembly.