Neopren Dryer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This dryer is designed to shorten drying times of neopren wetsuites and boots by constantly blowing air.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- GNU General Public License v3.0
This model is designed to dry a neoprene wetsuit faster.
It uses a 80mm computer fan to push air into the wetsuit. The circulating air results in quicker dry times.
The sideopening controls if air can exit through the blower or has to go through the wetsuit.
Two cones of different sizes allow the blower to be put into different sized wet gear. If the gear does not stay put use a bungee cord to fixate.
Be careful with choosing the electronics. The wetsuite might drip water onto the fan creating an electrical short.
I recommend using a powerbank and usb powered fans for portability.
Item | Placement | Sideslots |
|---|---|---|
Wetsuit | One in arm, One in a leg | closed to push air through wetsuit |
Gloves/Shoes | One | Open to allow air to vent |
3m screws are required for assembly.
