1 / 22
Customisable Tow Bar Hitch Cover v2 with text and image — zdjęcie 1
1 / 22

Customisable Tow Bar Hitch Cover v2 with text and image

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A customisable and parametric tow bar hitch cover to stop your hitch filling up with rubbish. This is version 2.

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A customisable and parametric tow bar hitch cover to stop your hitch filling up with rubbish. This is version 2: you can now add an SVG or PNG to the cover.

Measure the inner width of the hitch, the outer width of the hitch face, and the distance and diameter of the locking pin hole on your tow bar hitch and enter them in the scad customiser. You can be quite accurate with these as you can also enter tolerances in the script (see below).

Defaults are fairly generic and should get you in the ballpark (in Australia at least) and default tolerances should also be pretty close for a good fit for your print. I've changed some defaults from v1 to be more flexible when printed.

Added text and images are offset (0.01mm) for render due to scad render limitations (fuses text/image with the cover if level). This allows edge detection for painting. To print: in your slicer, ensure the cover is face down on the plate. If you've added text or image select Paint and use Fill- Detect outlines. Change the colours to suit your needs.

Create your own PNG to include. Use 1000x1000 pixels with black on a white background.

You can customise the following:

  • the width and height of the face,

  • corner rounding for the face,

  • the depth of the face side walls,

  • the thickness of the face and walls,

  • the width and height of the bar insert,

  • corner rounding on the external corners of the bar insert,

  • the thickness of the bar insert,

  • size and position of the locking pin hole clips,

  • a tolerance gap for the face side walls,

  • a tolerance gap for the bar insert,

  • a tolerance gap for the locking pin hole clips,

  • add up to three lines of text (choose a font that is installed).

New in V2:

  • also add an SVG or a PNG.

  • text and images can be independently selected as either inlayed or engraved, or left out.

  • simplified selection processes by using dropdowns.

  • resize and reposition images.

  • reposition the text.

  • text and images can also be engraved instead of inlayed.

  • apply colours to different elements to preview your design.

V2.01:

  • Removed preview checkbox. Model now automatically previews face up and renders face down ready for print.

The cover prints fine without supports for me, but this will vary by printer type. I've included some STL and 3MF files as examples but they've been produced to fit my hitch. SCAD defaults are set to my hitch requirements so check dimensions there before printing to avoid disappointment. There's a Holden logo cover for the Aussies, and one with the Aussie Para Batallion wings for my brothers in arms. The print profiles work, but may not fit your hitch.

Fair warning: I've indicated 1000x1000 pixels for PNGs to keep edges smooth, but they take a long time to render. You can drop the resolution at the expense of edge smoothness.

Tagi