1 / 3
Centreur de percement 3mm pour helice en montage en T 1.5 mm — zdjęcie 1
1 / 3

Centreur de percement 3mm pour helice en montage en T 1.5 mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Centreur de percement 3mm pour helice en montage en T 1.5 mm

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

english follow

pour les moteurs qui ont des axes de 3mm dont on voudrais adapter des helices en montage en T de 1.5mm .

a repercer d abord avec une mecge de 3mm et les autres trous en 1.5 mm.

mettre un petit clous en 1.5 mm sans tete et couper la longueur en trop 

For motors with 3mm shafts where you want to fit 1.5mm T-mount propellers:

First, re-drill the holes using a 3mm bit and a 1.5mm bit.

Insert a small 1.5mm headless pin and trim off the excess length.

Tagi