1 / 10
3D Sets - Mogster - Portal Gear Reinforced
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reinforced 10 tooth gear for the portal axle, so that the hex does not strip out and spin inside the C segment
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
this is a modified version of the 10 tooth gear of the portals on the Mogster, I added slots on the hexagon connector for metal 3x8mm pins or M2 screws or M3 set screws and also slots and holes for those in the C segment cardan, this should prevent the hex shaft to spin inside the cardan and the wheel to loose power.
you can choose from 3 verisions:
2x metal pin 3x8mm
2x M2x16 screw
2x M3x16 set screw
only the version with the metal pins is tested, but all of them should work
