XLPower Stratos 200. Blattgriff-Lager-Setzhilfe / Blade-Grip Bearing Setter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ein kleines Hilfsmittel um die äußeren Lager einzusetzen. A small tool for removing the outer bearings.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Dies ist ein kleines Hilfsmittel um die äußeren Lager in die Blattgriffe gerade einsetzen zu können. Dazu einfach aus relativ hartem Filament (PLA reicht) drucken. Anschließend wird das Lager in die vorgesehene Vertiefung eingesetzt und der Blattgriff mit moderatem Druck draufgedrückt. Sollte moderater Druck nicht ausreichen empfehle ich die Verwendung einer kleine Zwinge oder eines kleinen Schraubstocks. Wichtig ist hierbei das der Druck gleichmäßig wirkt und das Lager nicht verkantet.
This is a small aid to help you fit the outer bearings straight into the blade handles. Simply print it using a relatively hard filament (PLA will do). Then insert the bearing into the designated recess and press the blade handle down onto it with moderate pressure. If moderate pressure is not enough, I recommend using a small clamp or a small vice. It is important to ensure that the pressure is applied evenly and that the bearing does not become misaligned.
Printinformation:
PLA
0,2mm
100% infill
no support