1 / 4
XLPower Stratos 200. Blattgriff-Lager-Setzhilfe / Blade-Grip Bearing Setter — image 1
1 / 4

XLPower Stratos 200. Blattgriff-Lager-Setzhilfe / Blade-Grip Bearing Setter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ein kleines Hilfsmittel um die äußeren Lager einzusetzen. A small tool for removing the outer bearings.

Rating
0 / 5
Likes
2
Downloads
3
Makes
0
Views
41
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Dies ist ein kleines Hilfsmittel um die äußeren Lager in die Blattgriffe gerade einsetzen zu können. Dazu einfach aus relativ hartem Filament (PLA reicht) drucken. Anschließend wird das Lager in die vorgesehene Vertiefung eingesetzt und der Blattgriff mit moderatem Druck draufgedrückt. Sollte moderater Druck nicht ausreichen empfehle ich die Verwendung einer kleine Zwinge oder eines kleinen Schraubstocks. Wichtig ist hierbei das der Druck gleichmäßig wirkt und das Lager nicht verkantet.

This is a small aid to help you fit the outer bearings straight into the blade handles. Simply print it using a relatively hard filament (PLA will do). Then insert the bearing into the designated recess and press the blade handle down onto it with moderate pressure. If moderate pressure is not enough, I recommend using a small clamp or a small vice. It is important to ensure that the pressure is applied evenly and that the bearing does not become misaligned.

Printinformation:

  • PLA

  • 0,2mm

  • 100% infill

  • no support

Tags