Real Topographic Relief Maps - Mt Fuji, Osaka Bay, Gran Canaria, Lisbon (4-colour AMS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Real-data relief maps in 4 colours by altitude: Mt Fuji, Osaka Bay, Gran Canaria, Lisbon. Flat base, no supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Real topographic relief maps in four colours, built from open elevation data: Mount Fuji with its lakes, Osaka Bay with Awaji Island, Gran Canaria, and Lisbon with the Tagus estuary. Each 100 × 100 mm tile is coaster-sized desk art with a flat base; Mount Fuji also comes as a 170 × 170 mm centrepiece. The colours follow altitude (blue sea and lakes, green lowlands, ochre mountains, white peaks), so the colour changes happen layer by layer and you get very few filament swaps.
Details
Elevation from the free AWS Terrain Tiles (Terrarium, zoom 12, about 30 m per pixel), resampled to a 0.4 mm mesh (0.55 mm on the 170 mm Fuji). Each vertex is the real terrain height, nothing is sculpted by hand.
Vertical exaggeration chosen per map so the relief reads well but stays printable: Fuji ×3 (20.6 mm tall at 100 mm, 34.3 mm at 170 mm), Gran Canaria ×3 (11.3 mm), Osaka Bay ×6 (8.2 mm), Lisbon ×6 (6.3 mm).
Fine contour lines engraved into the land (0.22 to 0.30 mm deep): every 250 m on Fuji 100, 200 m on Fuji 170 and Gran Canaria, 100 m on Osaka Bay and Lisbon.
Crisp coastline: land starts 0.4 mm (2 layers) above the sea. Lakes Kawaguchi, Yamanaka, Motosu and Ashi (Hakone) are inlaid in blue at their real level; Sai and Shōji are too small to show at this scale.
Flat blue frame (8 mm, 11 mm on the 170 mm version) with raised lettering: place name, coordinates, scale and a small HANMA mark.
Colour bands: Fuji white above 2600 m and ochre above 1300 m; Gran Canaria 1400 / 650 m (white is Pico de las Nieves); Osaka Bay 600 / 250 m (Rokko and the Izumi range); Lisbon 380 / 180 m (Sintra and Arrábida).
Printing
One piece each, flat on the bed, no supports. Bambu Lab A1 mini with AMS lite, 0.4 mm nozzle, 0.20 mm layers. The 3MF files have the four colours already assigned.
Colours: blue #2F6DB5, green #5F9A4A, ochre #B98A52, white #F2EFE6.
Fuji 100 mm: 1 h 54 min, 35.2 g (23 colour changes, because the lakes share layers with the green).
Fuji 170 mm: 5 h 11 min, 109.0 g (27 colour changes).
Osaka Bay: 1 h 03 min, 26.0 g. Gran Canaria: 1 h 12 min, 27.1 g. Lisbon: 1 h 01 min, 25.8 g (only 3 colour changes each).
Times and weights are the slicer's estimates.
How it was checked
Real data: the highest point near each known summit comes out at 3744 m for Fuji (real 3776 m), 1934 m for Pico de las Nieves (1949), 914 m for Mt Rokko (931) and 503 m for Sintra (528). The grid is averaged, so peaks come out 1 to 5 % low. Controls: shifting the map 7 km east gives 1718 m, and swapping the R and G channels in the Terrarium formula gives 23429 m. Both fail, as they should.
Mesh against grid: every vertex of the relief matches its grid height to within 0.002 µm (float rounding), and the grid matches the height formula exactly except at the engraved contour lines. Control: the same mesh compared with a ×10 grid is off by up to 74 mm.
Colour bands: every colour body stays inside its height band; band limits fall exactly on 0.2 mm layer boundaries, within half a layer of the target altitude. Overlap between colour bodies: 0.0000 mm³ on all five maps.
Closed and watertight: every colour body and every terrain block is a closed, consistently oriented mesh (no loose or duplicated edges). Control: removing one triangle is detected. The flat base covers the full square (10000.0 of 10000 mm²; 28900.0 mm² on the 170 mm version).
No overhangs: no face points downward except the base, so no supports are needed. Steepest relief: 72 to 75° at the maximum and 65 to 70° at the 99.9th percentile (limits 80° / 72°). Control: at ×10 exaggeration the same check fails (up to 86°, near-vertical walls).
Nothing floats: every piece of each colour rests on the band below or on a lake inlay.
Files: each 3MF is 2.5 MB or less.
About this design
Designed with AI assistance and checked in code before release (see above). Pictures are 3D renders and the slicer preview, not photos. Not printed yet: makes and feedback are very welcome.
Elevation data: AWS Terrain Tiles (Mapzen Terrarium), built from SRTM, GMTED, ETOPO1 and other open sources.
Español
Mapas en relieve topográfico real a cuatro colores, hechos con datos de elevación abiertos: el monte Fuji con sus lagos, la bahía de Osaka con Awaji, Gran Canaria y Lisboa con el estuario del Tajo. Losetas de 100 × 100 mm con base plana y un Fuji de 170 × 170 mm. Los colores van por altitud, así que hay muy pocos cambios de filamento. No necesitan soportes.
العربية
خرائط تضاريس حقيقية بأربعة ألوان، مصنوعة من بيانات ارتفاع مفتوحة: جبل فوجي وبحيراته، وخليج أوساكا مع جزيرة أواجي، وجزيرة غران كناريا، ولشبونة مع مصب نهر تاجة. القطع بقياس 100 × 100 مم وقاعدتها مسطحة، ونسخة من فوجي بقياس 170 × 170 مم. تتغير الألوان حسب الارتفاع، لذلك يقل تبديل الخيوط كثيرا. لا تحتاج إلى دعامات.