1 / 3
Keystone Punch Down Stand for Cable Matters Jacks
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Will probably work with other Amazon jacks
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of mfischer79 original block, but modified to fit Cable Matters (and possibly other Amazon) keystone jacks. The original model was too narrow and didn't have the correct relief cuts.
Reliefs were made for the latch and the “wings” pictured below. This model was made to fit the Cable Matters jacks almost perfectly so I can't guarantee fitment with jacks of a similar design. However, I did include a “loose” version of this which should work with other manufacturers.
