Alfa Romeo 145 / 146 Headlight Adjuster Guide (Repair Part)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alfa Romeo 145/146 headlight adjuster guide. Replacement for brittle OEM plastic. Print with PETG/ABS/ASA. 100% infill.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
### Description
A replacement headlight adjuster guide (adjustment slider/bracket) for Alfa Romeo 146 and Alfa Romeo 145 (1994–2001).
The original factory plastic parts often degrade over time, become brittle, and snap, making it impossible to adjust the headlight beam correctly. Since these small components are not sold separately by OEM manufacturers, this 3D-printable replica allows you to repair your existing headlight housing without buying a costly entire headlight assembly.
Perfect fit for restoring both vertical and horizontal manual alignment mechanisms.
### Print Settings & Recommendations
To ensure the part withstands the engine bay temperatures and mechanical stress while adjusting, please follow these guidelines:
* **Material:** PETG, ABS, or ASA (Do NOT use PLA, as it will soften and deform from the engine's heat).
* Infill: 100% (Solid) or at least 40-50% with 4+ walls for structural strength.
* Layer Height: 0.15mm – 0.20mm for accurate teeth/guide reproduction.
* Supports: Depending on your model's orientation, minimal supports might be needed.
### Post-Processing Tip
Before installing, clean the adjustment screw thread and apply a small amount of lithium or silicone grease to ensure smooth rotation and reduce friction stress on the newly printed plastic part.