1 / 2
Chery Amulet A15 / Vortex Corda Cup Holder Trim Cover — zdjęcie 1
1 / 2

Chery Amulet A15 / Vortex Corda Cup Holder Trim Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Chery Amulet A15 cup holder trim cover. Replacement interior part for center console. Print with PETG/ABS/ASA.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

### Description

A replacement cup holder trim cover for the center console of Chery Amulet (A15), also known as Vortex Corda or Chery Flagcloud.

The original interior plastic parts in these cars often crack, get heavily scratched over time, or break during dashboard disassembly. This 3D-printable replica allows you to easily restore the look of your center console without searching for rare and expensive original interior trim parts.

### Print Settings & Recommendations

Car interiors get extremely hot during summer, so choosing the right material is essential:

* **Material:** ABS, ASA, or PETG (Do NOT use PLA, as it will warp and deform under direct sunlight inside the car).

* Infill: 20–30% with at least 4 top solid layers for a clean surface.

* Layer Height: 0.20mm. (Pro tip: use the "Fuzzy Skin" setting in your slicer to achieve a nice OEM-like matte textured plastic finish).

* Supports: Needed only for the clips/mounting tabs on the underside, depending on your print orientation.

Tagi