Liczymy pasujące modele…
You can print this vase to offer one rose to your valentine. The arch from cupid will allow you to display to your loved one a rose to express your love :) No support needed, can be printed in all different material. Leave a like and…
I, well, I didn't really need these, masking tape and center marker works just fine, but I wanted these. So after browsing a bit I gave up and opened the Fusion 360 and just made a model myself. This may not be exatly perfectly as what…
Just print two holder without support. Snap in up to 16 arrows with 8 mm diameter. Three arrows with a diameter of 7 mm can be inserted in the middle.
Armrest organizer. I made it for my car. Should be suitable for other cars of this brand. Send comments via feedback. If available, I will correct and supplement the model. I look forward to your suggestions for improvement. Printing with…
A modular brine shrimp hatchery: clip multiple units together and run them with a single air pump with a line splitter for a constant supply of fresh brine shrimp. the base is large enough to accommodate 2L soda bottles when multiple…
This is my archery arm guard, designed in Fusion 360. designed because not everyone has a heatgun to bend plastic, so after you have printed this just bend it by hand into shape. printed at 0.15 in PLA Category: Sport & Outdoors
Info Both designed for 8mm arrows. I print arrowhead with 100% infill PLA and it works fine. For more durability, you can use etc. PETG, ABS. Recommended usage: Use the extender as close to the tip as possible for maximum efficiency…
Arrow holders for your extra arrows, fits all micro diameter to large diameter arrows. Need to print 1 top and 1 bottom, plus 4 legs. I printed in PETG with 7% infill for top and bottom Legs are printed with 3 perimeters and 15% infill…
just glue two halfs togehter and set them in place
This piece is very small. So I've printed it with a .2 nozzle and very thin layers.
Easy to use fletching jig! Insert your arrow with its nock in the tube trace the lines qith a pen, and you are ready to fletch your spiral vanes. Note: two models available one for small diameter arrow (ie: skylon paragon…) and another…
just print two holder without support and snap in up to 12 arrows
Armrest Container Storage Box for Chery Tiggo 8. There are 2 type (with cable slot, without cable slot)
This is a simple brine shrimp hatchery base for culturing brine shrimp for fish breeders. Print it out and screw on a plastic 2 liter bottle with it's base cut off (see photo at left). Once printed, I suggest brushing the inside with…
Credit to original creator: https://www.thingiverse.com/thing:2350587
By request: Archery Pocket Quiver with Hoyt Logo Logo from here: https://www.thingiverse.com/thing:3033674 Other designs: Martin Archery: https://www.printables.com/model/431226-archery-pocket-quiver-with-martin-archery-logo PSE:…
By request: Archery Pocket Quiver with Mathews Logo. 8 mm and 11 mm is the diameter of the holes for arrows. For outdoor/3D you may use thin arrows so take 8 mm, for Indoor arrows or thick arrows take 11 mm. Other designs: Martin Archery:…
A set of several archery targets featuring detailed a detailed rope circle target, various wooden frames, and a stencil to help paint target rings on the rope targets if desired! I love these as scatter because they're a great mix of…
These archery blinders are designed for archers like me, who struggle with eye dominance or focusing on the target with both eyes open. There are two variants using the same shield. Each variant can be clipped onto a baseball cap that.…
An alternate stand I made for the Ziss Brine Shrimp hatchery. The sides of the stand are open as well as the front to make accessing the knob easier. I have also designed a drip tray that fits snugly at the bottom of the stand
Fletching jig for original Ek Archery 7.5" Adder Crossbow Bolts by Joerg Sprave (2 Vanes). Print: 1x Base 1x Arm_A (or Arm_A_0.3_Offset) 1x Arm_B (or Arm_B_0.3_Offset) 2x Lever Parts needed: 3x M3x30mm Screw FH 3x M3 Nut (recommended…
Info Working mini bows wih arrowhead. Both are design from pictures of Hungary and Turkish bows. Bowstring is from ordinary rubber band. Hungary bow - simple design Hungary bow - real look Turkish bow Arrowhead is design for 3mm skewers.…
This post contains 3 models related with the practice of archery: The first model is a simple clip, used to keep the turns on your string when putting it in a storage. The second one is a replacement for the finger wedge in finger tabs.…
This is a mostly 3d printed fletching tool. Suitable for fletching arrows with 3 fletches. The frame is based on 20mm by 1.85mm flat Aluminum stock from the hardware store. The spacing between components can be adjusted to suite your use…
I fixed few problems on original design. Wings will not break with light touch, bow and arrow fits in their place without sanding/drilling and I added number 1, but you can also use Dymo sticker instead. Use super glue to secure bow,…
Good morning I present to you a nail to hold the target in place, easy to print, 50% filling for more solidity. Its shape allows it to be inserted and removed easily. thank you for your feedback Bonjour Je vous présente un clou pour…
Remixed model from https://www.thingiverse.com/thing:5652877, to hold 12 nocks. It's a challenging print if you have warping, recommend using raft. Some failed prints could be still used.
A simple arrow rest I designed for my little brother's bow after the one he had on his bow broke. Designed so that the fletching can go through with minimal contact. The one I printed was designed for 7mm arrows, 10 mm away from the…
A nice way to conveniently store your bow when not in use. Mounts to wall using two screws. Use the two rests to add a snug fit, some foam padding to prevent any scratches. Print the rests upright as shown for best results. If you need…
The arrowrest is very simple to print. Just print the base and rest as you can see at the picture. There is no support. After printing just use superglue. This will ensure very good durability. I suggest to use ABS or PLA or material that…
Needed some big nails for my archery target. Sinks well in to the foam back and keeps the paper target in order.
i printed it in PLA (well… extrudr flax which is, as far as i know, PLA with flax fibres) and 100% infill. layerheight doesn't matter too much i guess since it needs quite a bit of sanding - inside for your finger and outside for the…
I remixed this to make it 15% larger to accomodate larger broadheads. It should still fit smaller heads too. I also adjusted the clips and hinge bars so they clip in and pivot better without falling out. 10% infill. No supports (used…
If you are an archer like I am, and you work on your own equipment rather than dump $$ at the archery pro shop, you probably build your own arrows. It is a well known fact that in any launched projectile the Center of Pressure (exerted by…
Simple archery target face pin. I wanted to be able to print different colours for others at my club to use as Barebow markers. Printed at 0.16 per layer, 1.2 wall thickness and 80% infill cubic. This seemed to produce the strongest build…
This Target is X91.57 Y91.57 Z 1.5 all in mm. you can shoot at it or use it as a stencil. i printed it on my Prusa MK#S+.
Use a straight piece of wood 90 to 100mm or deeper, 1100mm wide is enough to cut 35” arrows. I used 12mm thick wood, but a bit thicker can be better so you don’t have to use short screws. Based around a Dremel 395. It should be fairly…
Berated for placing my bow on the grass, and after purchasing my first ILF bow, I decided to create a stand to hold my bow whilst fetching my fletchings. Here is a simple 2 hour print that holds your bow off the grass thus providing you…
A simple endcap to screw on stabilizer end, to add protection and a bit of color. Two version are provided, to fit ¼" and 5/16" screws found on most weights. For improved durability (weak point is the thread) I suggest printing this model…
a small and reasonable fast printable target pin for the archery community
Print Settings: Material: TPU Layer height: 0.1 ~ 0.15mm 2 walls for 0.25 nozzle (1 wall 0.4 nozzle) 0 top & bottom layers 0% infill Requires serving thread to hold it in place!!!
These covers protect the blade tips from (some) damage, and of course also your skin from the razor sharp blades! Designed for two brands of hunting bolts for the EK Archery Cobra System RX Adder crossbow: Steambow Nik Archery (listed as…
Info First time I printed it with small lateral tips, but this damaged the main tip (probably bad slicer settings) - pic. 3, so I removed it, because lateral tips are not necessary. no support needed (except " target_pin_v2_type_C " and…
A keychain to print with the mmu. Represents an archery target
Hatchery, Lair and Hive meshs from Star Craft 2: Heart of the Swarm. All three are in the same STL. Disclaimer: This model is the intellectual property of Blizzard Entertainment, Inc. Reproduction for personal use is not explicitly…
Just a set of fun toilet symbols I put together for my archery club. Category: Sport & Outdoors
Simple/minimalist template which fits a medium sized hand. Can be re-scaled as necessary in the slicer. Use two pieces of ~2mm leather on a 40# bow. Pieces sewn together along one edge.
Archery release aid/protection used for thumb draw, commonly used in Asiatic/Eastern archery styles. The files include sizes 15 mm to 24 mm, as well as the Fusion 360 file for more custom sizes and fits. Each ring has the size embossed on…
No supports needed layer height 0.2 for good grip texture material PLA- works Beiter model made in Blender,Cartel in fusion360. Beiter is elliptical
A great Wall Art of an woman archer. Do not forget to upload your makes and LIKE the model, thanks ! Inspired by a sticker
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE: December 24th, added a V3 no-mess lid if you are…
An alternate replacement for the safety block in EK Archery's Cobra RX Adder crossbow. The original safety will automatically engage whenever you repeat the crossbow which can really be an annoyance at times, and is a hindrance for high…
Quick print target pin with extra pins for holding the face in place for archery targets. With a .6mm nozzle it's printable in a few minutes, slow printing in 12m als my example gcode that printed the green pin shows. No support needed,…
Designed for EK Archery's Cobra RX Adder crossbow. These washers replace the original ones in the bow assembly and will angle the bow wedged inbetween them slightly more upwards. This is so that the bow string has less friction on the…
English: A small and neat Pocket-Quiver I designed for my backpocket. Scale as you need it. At 100% the holes are 8.25mm wide and tilted from the inner to the outer holes by 1 degree, 1,5 degrees and 2 degrees, so the feathers/vanes do…
I did this archery pocket quiver mainly to learn to use Fusion 360. I am a compound archer and PSE fanboy, but did it also without any logo. Printed with Palette 2 Pro and works great! TK-color is the one with the skull. PSE-color ist the…
It's for pinning paper target faces to your target.
3D printed insert for DIY leather finger tab for barebow archery. Ideally print in two colors (by changing to a new filament color for the last several layers). The model is provided in six variants: right hand and left hand versions of 3…
165mm woofer mount for Chery 703000407AA speaker replacement.
Me di cuenta que esa pieza es un tanto frágil y me pareció exagerado el precio del reemplazo, así que la diseñe para quien la necesite
archery hand guard template for leather
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
I made these medals for kids who participated in the archery tournament. The arrow part is modeled as a separate piece because I painted those using gold, silver, and bronze acryl colors and superglued them. The space in the top is made…
Designed for EK Archery's Cobra RX Adder crossbow. There is a gap where the bolt guide rail meets the safety cage into which bolt nocks might dive too deep and jam the crossbow. This part covers said gap and should make the repeating…
Split finger archery tab template. 3 layers with offset
Pinted out of PETG PC. Rods are Steel 10mm Diameter 260mm but shorter should also work fine for the legs. Magents are 3x 8mm Diameter by 5mm and 3x 5mm Diameter by 5mm. Also check out…
Replacement Pin for Archery Sight. Category: Sport & Outdoors
The print is functional and has been holding up pretty well in PLA but will prabably be better in PETG for the added flexablility and enviormental durability. Added two modified versions. one thicker at 9mm and one with a rounded hook…
The nocks on my arrows are a particularly tight fit, and I made this tool to enable me to easily fit my nocks. Seat the nock on the pin in the arrow, place the nock into the tool, and then press the arrow down to fit the nock. The groove…
This button is designed for use with thumb-trigger release aids. The hexagonal helix allows your thumb to find a consistent placement as you execute your shot. Measures 20mm (h) x 18mm (w). Includes a hole which will allow the standard M3…
Sight pin for recurve bows, fits 4mm rod PETG is recommended, no support, 10 minutes quick print.
Extra large finger spacer for finger tab for Olympic recurve archers.
Release aid for archery. Denser prints are better. To use: the reverse of a traditional trigger release. You point your index finger forwards to release. I use it on my 70lb compound bow so the model can handle the force
I optimized printing for my self with 1 mm nozzle. Each pin is about 2.4g of material and can be printed in about 2-3 minutes. Layer height- 0.5mm, Layer width- 1mm. My printer required some optimization, had to adjusts “extra prime…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
These are simple recurve archery sight pins; aperture/peep style, so "pinless" pins. This style works well with your eyes' natural tendency to automatically center things within a circle. These are modeled with 8-32 threads, a common…
4mm Arrow nock that may be printed in PLA. You may need to slow down the print. There may be a bit of stringing across the string prong that is easily removed. The brim should be set for inside and outside to anchor the print. Bonus,…
Similar to https://www.printables.com/model/237446-archery-bow-stand Except much much lighter being made from 10mm x1mm Aluminium tubing instead of solid steel. For the legs 8mm steel lugs are glued into one end so that the 8mm x5 magnets…
An archery thumb ring for asiatic style archery. Intended to be used with a deep hook style. This design incorporate a set of string guards, but I want to make them as low profile as possible so they don't get in the way. The width of the…
Printed with Ender 3 V2 to repair a broken part. Parameters used: PLA, 0.4mm, 220 oC extrusor, 60 oC plate. 100% infill.
Simplified archer for easy printing
Description: This is a Batmobile (Tumbler design)-inspired back quiver. Although it's designed as a single entity, it's recommended to slice it into smaller printable pieces (you can use PrusaSlicer for that). To reduce the rattle of the…
Archery Target Pin with built in support. Designed with a .4 nozzle in mind.
This is a remix of the popular target pins already on this site. Those pins are shorter and probably work well for indoor foam targets, but this one is aimed at looser-but-thicker targets like hay bales. It's not very sharp, but it can…
Ok, so, as you can see, I broke my clicker. It was crap and I carefully tried to bend it. I was soooo annoyed for a few days but then I got thinking. I have polycarbonate carbon fiber filament loaded to my printer and hey, don't they make…
My take on the Archery Range from Age of Empires 2. Fixed Version available https://www.thingiverse.com/thing:3400998 By https://www.thingiverse.com/TheOrdner/about Category: Video Games
I designed a sun shade for the Mybo Ten Zone scope loosely based on the original model “ Sunshade for Ten Zone compound scope ”. The shade is made to slip on to the scope from the front. Held in place by a detent that engages with the…
Made this Remix for making lines on my X23. You can use it with nocks or without.
An archery thumb ring for asiatic style archery. Intended to be used with a shallow hook style. The width of the bottom of the ring is 20mm across, so scale accordingly. Suggest to print the ring 100% solid by turning wall layers as how…
Keychains in various versions. Keychains modeled after the seat belt alarm lock. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…
Archery Release thanks to erdikalleci for the model
An archery target snowflake holiday ornament. Print the colors separately and simply press fit together. A spot of glue can be used if you have a loose fit.
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
I made a Thumb Ring Sizer to allow you to find your Thumb Ring size before buying a Ring for Archery. It is based on Vermil Chart Thumb ring. On the “Black Classic” model tab chart. It's in mm. Only Y height and AxB diameter are on the…
I designed this replacement arrow rest specifically for 3D printing. The intention was to use as thin a profile as possible to allow the plastic to flex under use. The recommended print orientation helps to prevent cracking and breaking…
A Chinese style archery thumb ring, recreated from written sources dating to the Ming Dynasty. This ring was created by Gaoying (高穎), an archery teacher from the late Ming Dynasty, he preserved his knowledge regarding archery techniques…
This automatically pushes the safety switch forward so you can directly shoot after reloading with your vlad. The switch is toggleable, so you can always disable it and enable the safety switch again. Print with atleast 20% infill in any…
Printed with Ender 3 V2 to repair broken parts. Material: PLA, 220 oC extrusion, 60 oC at plate, 100% infill.
