Counting matching models…
4mm Arrow nock that may be printed in PLA. You may need to slow down the print. There may be a bit of stringing across the string prong that is easily removed. The brim should be set for inside and outside to anchor the print. Bonus,…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Simplified archer for easy printing
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
I made a Thumb Ring Sizer to allow you to find your Thumb Ring size before buying a Ring for Archery. It is based on Vermil Chart Thumb ring. On the “Black Classic” model tab chart. It's in mm. Only Y height and AxB diameter are on the…
Print approx. €3.35–€4.09 excl. taxPreliminary estimate for one variant
A simple hook to hang everything on your quiver or your belt. No support needed.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
a small and reasonable fast printable target pin for the archery community
I optimized printing for my self with 1 mm nozzle. Each pin is about 2.4g of material and can be printed in about 2-3 minutes. Layer height- 0.5mm, Layer width- 1mm. My printer required some optimization, had to adjusts “extra prime…
I designed this replacement arrow rest specifically for 3D printing. The intention was to use as thin a profile as possible to allow the plastic to flex under use. The recommended print orientation helps to prevent cracking and breaking…
Clip for holding bowstring ends. Tested with PLA, works well in vase mode (0.8mm) or any 0.4mm nozzle should be fine. It's a quick print, so worth making a few.
As my tab wore in, the orginal rubber finger divider started to let go of the leather. I quickly designed this replacement with a slightly larger retaining area to keep the leather bound together. I printed mine from ASA, but I want to…
It is a arrow holder designed for the outdoors, you will need a pipe for the center for the arrows, I added this part because most printers cant print that high. The main reason its designed for outdoor use is because you can add weight…
All you need is a 10mm dell and some glue. Dell goes down the center and keeps everything in place, use the taller arrow clip for the bottom and shorter one goes to the top with the smaller circle. The fletch protectors are not needed but…
English: A small and neat Pocket-Quiver I designed for my backpocket. Scale as you need it. At 100% the holes are 8.25mm wide and tilted from the inner to the outer holes by 1 degree, 1,5 degrees and 2 degrees, so the feathers/vanes do…
A Chinese style archery thumb ring, recreated from written sources dating to the Ming Dynasty. This ring was created by Gaoying (高穎), an archery teacher from the late Ming Dynasty, he preserved his knowledge regarding archery techniques…
Your all-in-one holder for organisation and quick access to replacement nocks including helpful tools. Everything you need together in one system. Easy accessible - everytime. This companion is perfect for: Easy storage Quick access…
I built the models for printing on the Prusa Core One+. The models are all .1mm larger than actual size to help with shrinkage issues. Originals were printed in PLA with .4 HF nozzle at .2 balanced setting, gyroid infill at 15 %. To use,…
This flashlight mount can be placed between the bow itself and the stabilizer. It enables you to keep practicing Archery and stay in shape, even when the days become shorter again. It fits large flashlights and with some spacer or some…
I recently bought my new Chery Arrizo 8 (Noble) and wanted to have a 3d printed model. I looked for a 3d model for it, since I didn't find one, I decided to model one and here we're with a new fresh model of a Chery Arrizo 8 Noble. Easy…
I designed this replacement arrow rest specifically for 3D printing. The intention was to use as thin a profile as possible to allow the plastic to flex under use. The recommended print orientation helps to prevent cracking and breaking…
Chery Amulet (A11/A15) Interior Door Handle Decorative Trim Description: 3D replacement for the interior door handle trim of the Chery Amulet (A11/A15). Designed based on original OEM geometry to ensure a perfect snap-fit into the door…
This is a functional copy of the original trunk bag hook for the Chery Tiggo 7 Pro. If you've lost one (like I did), this 3D-printable version will snap right into the factory mounting point. Unlike the original part which can be flimsy,…
Защитная крышка выдвижного порога Chery устанавливаются в места предназначенные под них. защищают от пыли и влаги трущихся элементов
All you need is a 10mm dell and some glue. Dell goes down the center and keeps everything in place, use the taller arrow clip for the bottom and shorter one goes to the top with the smaller circle. The fletch protectors are not needed but…
Rapide et facile à imprimer avec des supports en pla ou petg. Remplissage 30% suffisant pour mousses ou 70% à 100% pour paillons durs. La forme permet de bien maintenir le blason et la prise en main permet de le retirer facilement
Easy to use fletching jig! Insert your arrow with its nock in the tube trace the lines qith a pen, and you are ready to fletch your spiral vanes. Note: two models available one for small diameter arrow (ie: skylon paragon…) and another…
Sight pin for recurve bows, fits 4mm rod PETG is recommended, no support, 10 minutes quick print.
"Halterung Unten V3" Are for deeper Targets --> The one from the Pictures. "Halterung Mitte" Are needed to stack 2 Board First Version of Halterung Unten can be used for higher Targets. The A,B,C,D Holders can be found on my Profile. →…
As my tab wore in, the orginal rubber finger divider started to let go of the leather. I quickly designed this replacement with a slightly larger retaining area to keep the leather bound together. I printed mine from ASA, but I want to…
A set of several archery targets featuring detailed a detailed rope circle target, various wooden frames, and a stencil to help paint target rings on the rope targets if desired! I love these as scatter because they're a great mix of…
Hatchery, Lair and Hive meshs from Star Craft 2: Heart of the Swarm. All three are in the same STL. Disclaimer: This model is the intellectual property of Blizzard Entertainment, Inc. Reproduction for personal use is not explicitly…
just glue two halfs togehter and set them in place
This is an archery arm guard for kids designed to protect their forearm from being slapped by the bow's string while shooting. The design prints flat on your printer. After printer, use a heat gun and a form to bend the outer wings to the…
I designed a sun shade for the Mybo Ten Zone scope loosely based on the original model “ Sunshade for Ten Zone compound scope ”. The shade is made to slip on to the scope from the front. Held in place by a detent that engages with the…
An MMU print of a Halloween Bat Archery Key Chain/Quiver Tag.
A great Wall Art of an woman archer. Do not forget to upload your makes and LIKE the model, thanks ! Inspired by a sticker
Archery Recurve Bow Klicker. For visor rail with 7mm wide. Fixing material 1x screw DIN 912 M3x40, 1x Screw DIN 912 M4x16, 1x nut M4, 1x nut M3
Info Both designed for 8mm arrows. I print arrowhead with 100% infill PLA and it works fine. For more durability, you can use etc. PETG, ABS. Recommended usage: Use the extender as close to the tip as possible for maximum efficiency…
Info First time I printed it with small lateral tips, but this damaged the main tip (probably bad slicer settings) - pic. 3, so I removed it, because lateral tips are not necessary. no support needed (except " target_pin_v2_type_C " and…
This is an archery damper based on the pedals of the cherry blossom flower. This has ¼-20 threads and its durometer can be adjusted based on your infill parameters. I printed this with TPU on an Ender 3 S1 Pro
Replacement part for an amazon archery game target stand
By request: Archery Pocket Quiver with Mathews Logo. 8 mm and 11 mm is the diameter of the holes for arrows. For outdoor/3D you may use thin arrows so take 8 mm, for Indoor arrows or thick arrows take 11 mm. Other designs: Martin Archery:…
A 3D printed archery keychain for all you archers. If you would like a customised design file for your printer then please message us. We would be happy to provide you with a custom file for your budget.
I decided to try and make an arm guard. This was printed with TPU to provide flexibility for fit and ease of printing. No support is needed as the model prints flat. There are four slots to attach elastic ribbon or straps. The openings…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE: December 24th, added a V3 no-mess lid if you are…
I was wondering what to do with a few metres of filament left on a spool and I realised that I could print up a few target face pins for my local archery club. I'm no designer & micro$oft's 3d builder was in front of me so I gave it a go.…
A 3D printed archery keychain for all you archers. If you would like a customised design file for your printer then please message us. We would be happy to provide you with a custom file for your budget.
These are hangers that I created to snap onto @The_Printed_Aquarium's Brine Shrimp Hatchery , that allows me to just hang the hatchery onto the side of one of my tanks. I made this is two different sizes one fits a rimless tank with 4mm…
Box with magnetic lid for transporting the Bowscale HS4 from Last Chance Archery safely. The Box has space for two spare Batteries CR2032. For the magnetic lid, you need 8 magnets with a diameter of 4mm and a depth of 3mm.
Spacer for archery weights to individualize your bow. Available for the 5/16" and 1/4" threads.
Beim Bogenschießen mit einem Tab wird das Tab über einen Gummizug an einem Finger festgehalten. Dadurch wird der Finger mehr oder weniger eingeschnürt, was unangenehm sein kann. Um dieses Einschnüren etwas zu reduzieren, habe ich ein…
My take on the Archery Range from Age of Empires 2. Fixed Version available https://www.thingiverse.com/thing:3400998 By https://www.thingiverse.com/TheOrdner/about Category: Video Games
A nice way to conveniently store your bow when not in use. Mounts to wall using two screws. Use the two rests to add a snug fit, some foam padding to prevent any scratches. Print the rests upright as shown for best results. If you need…
Print Settings: Material: TPU Layer height: 0.1 ~ 0.15mm 2 walls for 0.25 nozzle (1 wall 0.4 nozzle) 0 top & bottom layers 0% infill Requires serving thread to hold it in place!!!
This includes 5 different size rings that you can hang up with the included pins for fun archery target practice. I printed on PLA with 15% infill on Prusa Core One
An Archery Quiver that fits any standard arrow It will require an M6 X 5mm screw and a strap of 26mm in width and 4mm in
To protect the bow riser from contact with arrow. Most used for Compound bows, I use it with my PSE Mach33 but will fit others. Best printed in ultra soft TPU/Flex filament. Use double sided tape like 3M to mount it to the bow.
The archery scope EC33 from Arc Systeme is a very nice one, but the provided sun shield is a bit short when the sun is very low and facing you on the shooting field. This extension covers a larger angle. It can be easily mounted between…
Me di cuenta que esa pieza es un tanto frágil y me pareció exagerado el precio del reemplazo, así que la diseñe para quien la necesite
This is a model of the Fairweather Archery Pro Tab backplate. I wanted a full metal finger tab, so I made this model and had it made on a CNC out of stainless steel. You can also use this model to 3d print your own backplate in any color…
Extra large finger spacer for finger tab for Olympic recurve archers.
I really appreciated this stand as the stock stand stops you from easily turning the valve. I required a handle. So I mashed one in. I used tree supports only around where the hatchery sits in place. Thank you too the original creator.
English: A small and neat Pocket-Quiver I designed for my backpocket. Scale as you need it. At 100% the holes are 8.25mm wide and tilted from the inner to the outer holes by 1 degree, 1,5 degrees and 2 degrees, so the feathers/vanes do…
Release aid for archery. Denser prints are better. To use: the reverse of a traditional trigger release. You point your index finger forwards to release. I use it on my 70lb compound bow so the model can handle the force
Fletching jig for original Ek Archery 7.5" Adder Crossbow Bolts by Joerg Sprave (2 Vanes). Print: 1x Base 1x Arm_A (or Arm_A_0.3_Offset) 1x Arm_B (or Arm_B_0.3_Offset) 2x Lever Parts needed: 3x M3x30mm Screw FH 3x M3 Nut (recommended…
Custom Nail design for archery target Printer setting: 0.2 layer 15% infill No supports brim is recommended
ILF Recurve Shims Precision-fit shims for quickly adjusting limb pitch on ILF recurve bows—just like adding limb bolt turns, but without touching the bolts. These are great for training with a slightly heavier draw or quick re-tuning for…
This button is designed for use with thumb-trigger release aids. The hexagonal helix allows your thumb to find a consistent placement as you execute your shot. Measures 20mm (h) x 18mm (w). Includes a hole which will allow the standard M3…
The arrowrest is very simple to print. Just print the base and rest as you can see at the picture. There is no support. After printing just use superglue. This will ensure very good durability. I suggest to use ABS or PLA or material that…
Archery target pin with ergonomy xyz - 16 mm; 16 mm; 48 mm Infill - 25% gyroid Print time - around 1 hour / 4 pins with support
Archery release aid/protection used for thumb draw, commonly used in Asiatic/Eastern archery styles. The files include sizes 15 mm to 24 mm, as well as the Fusion 360 file for more custom sizes and fits. Each ring has the size embossed on…
This is a simple brine shrimp hatchery base for culturing brine shrimp for fish breeders. Print it out and screw on a plastic 2 liter bottle with it's base cut off (see photo at left). Once printed, I suggest brushing the inside with…
Update 11/2/25: New V2 barrel inserts (second photo) have been added to the files. These allow you to fit one insert into each barrel. Making for a total of 8 usable barrels as compared to V1's 4 barrels. Easy print barrel inserts…
M-Bow (Mini Bow) The Osprey is the toy bow I always wanted as a child. With its huge plunger tube and real bow action, it has tons of potential for fun and modification. The goal of this kit was to take advantage of that potential and…
Mounted Archery Card / Badgeholder. Fits the standard badge size: 85,60 × 53,98 × 0,76 mm (3,370 × 2,125 × 0,030 in). Compliant with ISO/IEC 7810 ID-1 (CR80 ID Card model) format. Printing recommandations Use a 0.2mm or a 0.4mm nozzle…
Print multiple and stack for custom spacer sizing. Requires some disassembly to install. I run 2 spacers but there is room for more. Experiment to find what works best with your setup. It was discovered that the end cap may be solvent…
I wasn't satisfied with how my bows rested on this ground quiver, so I made an adapter that slides on and balances my two sizes (54" and 66" risers). Print in PLA (or whatever) and secure with two TPU o-rings.…
Based on models I'd seen online, This tab sandwiches leather between two printed plates. A ring screws in through the whole assembly and acts as a finger spacer. Used 3 pieces of leather (about 1mm thick each) PDF of leather pattern…
Bowstring Ends are fixed in the base part. You can use foam to get your button and other stuff fixed. In the cover part there is already build-in minimal support structure to handle the overhang. Can be removed easily. BOM: - 2x Screw M3…
The bottle caps you need are these kind. https://www.amazon.ca/gp/product/B08D84V1MM/ref=ox_sc_saved_title_9?smid=A2S4AMWFXIKP8L&psc=1
Autodesk Fusion file is included so you can customize text. Recommend printing with enough perimeters and top / bottom layer to get a solid print. Helps to give it enough weight to be stable.
An archery thumb ring for asiatic style archery. Intended to be used with a shallow hook style. The width of the bottom of the ring is 20mm across, so scale accordingly. Suggest to print the ring 100% solid by turning wall layers as how…
An archery thumb ring for asiatic style archery. Intended to be used with a deep hook style. This design incorporate a set of string guards, but I want to make them as low profile as possible so they don't get in the way. The width of the…
Archery thumb rings, or 扳指 (bān zhǐ), have a long history in China. This ring was excavated from the tomb of the king of the State of Rui (from the Spring-Autumn Period, 771-476 BCE). Modern reproductions of this style of ring still…
A Chinese style archery thumb ring, recreated from written sources dating to the Ming Dynasty. This ring was created by Gaoying (高穎), an archery teacher from the late Ming Dynasty, he preserved his knowledge regarding archery techniques…
A style of Chinese archery thumb ring commonly referred to as 元寶扳指 (yuánbǎo bānzhǐ). Yuanbao means precious metal ingots, so named because it resembles the shape of the standardized gold/silver ingots smelted in Imperial China. Numerous…
Your all-in-one holder for organisation and quick access to replacement nocks including helpful tools. Everything you need together in one system. Easy accessible - everytime. This companion is perfect for: Easy storage Quick access…
I built the models for printing on the Prusa Core One+. The models are all .1mm larger than actual size to help with shrinkage issues. Originals were printed in PLA with .4 HF nozzle at .2 balanced setting, gyroid infill at 15 %. To use,…
This is a custom Mould ive made for our archery Club. It includes our Logo as Beer brand and a standard target on the other side. Its supposed to be filled with PU foam. Repair foam for archery targets is what we used. The Volume is ca.…
print with 14mm layer height 7% infill this is my first upload so if you have any suggestions feel free to tell me
This flashlight mount can be placed between the bow itself and the stabilizer. It enables you to keep practicing Archery and stay in shape, even when the days become shorter again. It fits large flashlights and with some spacer or some…
Wiper Arm Bolt Hole Plug Chery Tiggo 7 pro max Designed based on the original plug (lost one, used the other as a reference). Fits a 25 mm hole. I printed it in TPU , but PETG should work as well. Please check the dimensions of the…
