(Parameterizable) IKEA SKÅDIS batteries dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parameterizable IKEA SKÅDIS batteries dispenser.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 28
- Wydruki
- 2
- Wyświetlenia
- 136
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The attached FreeCAD file allows you to easily change the size of the dispenser and create dispensers for different battery types. Pre-cut STL and STEP files are provided for AA, AAA, and 18650 batteries.
It is also possible to keep the same external dimensions while changing the slot size, so dispensers for different battery types can look identical. However, in this case, the design has to accommodate the largest battery size. For smaller batteries, this will result in thicker walls.
The dispenser consists of two independent parts and is designed to be printed with supports only under the hooks. When modifying the design, make sure that the horizontal distance between the hooks is a multiple of 40 mm. 40 mm should be enough for anybody, though.