Tombstone Display Wall Mounted / LED Backlit Accent Piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall-mounted tombstone display! Built-in keyhole slot, recessed back for LED lights & optional Plexiglas halo backplate.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bring an eerie, atmospheric glow to your wall with this wall-mounted LED tombstone accent piece! Featuring a distressed stone border, "R.I.P." lettering, grass tufts, and a detailed skeleton hand reaching up from the grave, this display casts a haunting silhouette day or night.
Display it directly as a striking standard wall accent or upgrade it with built-in rear LED channels for a glowing backlit effect. For an ultra-clean halo lighting glow against your wall, you can easily attach a matching custom-cut piece of Plexiglas to the back using the integrated screw holes!
Originally conceptualized as a custom woodworking project, this model has been fully adapted for 3D printing with precise tolerances, hidden wire routing, and customizable lighting options. Print it as a standalone desk accent, or use it as a physical template guide for scroll saw woodworking!
Be sure to explore the rest of my lighting collection here: Illuminated Silhouette Collection
Key Features:
Flush Keyhole Wall Mounting: Features a built-in keyhole slot on the back designed for #3 screws or small finish nails, holding the entire display completely flush against your wall.
Detailed Skeleton Hand & R.I.P. Cutouts: Intricate cutaways in the face let LED backlighting shine cleanly through the bone details, stone cracks, and lettering.
Halo Backlighting Options: Features a hollowed-out rear cavity for LED light strips. Attach an optional custom-cut Plexiglas backplate using the integrated screw holes to create a smooth, diffused lighting halo against the wall.
Woodworker & Hybrid Friendly: Functions as a physical template guide if you prefer cutting real wood for a hybrid build!
Dimensions
Width: 6″
Height: 9″
Thickness: 0.375″
Print Settings
Material: PLA or PETG
Layer Height: 0.12mm to 0.20mm (0.16mm recommended for fine skeleton finger details)
Infill: 20%+ (Gyroid or Grid)
Orientation: Print flat face down on the build plate for a smooth surface finish.
Supports: None required
Looking for a tabletop base edition instead or other variations?
Check out my companion listings here: