Motion Sensor Wall Plate / Beweunsmelderabdeckplatte für Unterputzdosen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall plate for mounting motion sensors in a wall. Dry Wall or german "Unterputzdose" (in wall housing).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall plate for mounting motion sensors in a wall. Dry Wall or german "Unterputzdose" (in wall housing). It fits the 14mm sensors of stairs LED lighting controllers. It features:
the 80mm main plate (Abdeckung) with screw holes accordingly placed for the 60mm UP-Dose
the through rotation adjustible sensor cover (Haube)
an open fixation ring to clamp the sensor from behind to the main plate.
Additional parts needed: either the UP-Dosen-Schrauben (Screws for the in wall housing) or any M3 screws. length is up to your needs.
If you have dry walls, tho.... dunno.... maybe a hot glue gun and prayers?^^ Just use your regular screws, I guess...
Print Settings
Printer Brand: Snapmaker
Rafts: No
Supports: No
Resolution: 0,2
Infill: 15% max
Filament: Snapspeed PLA PLA White
Notes:
Any other PLA/PETG works perfectly fine. cover is designed so that no supports are required.
2 Plates in the snorca 3mf; Plate 1 is for 2 sensor mounting plates. plate 2 is for 1 sensor mounting plate.
I also added on Thingiverse (thing:7417330) in snorca presliced gcode files for plate 1 and plate 2 for the Snapmaker U1.
so hope it helps :-)
Post-Printing
see assembly guide