1 / 1
Multi Color Calibrator - Cheap and Fast Spiral Vase — zdjęcie 1

Multi Color Calibrator - Cheap and Fast Spiral Vase

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cheap and fast multi color calibrator using spiral vase mode for a 1 wall, no fill tester in 7 mins.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Just a simple, cheap, and fast calibrator for multi color filaments. I've been using several round calibration tools, but it was difficult to determine how that gradient would transfer to flat surfaces (like boxes). So just made one with many sides. 45 degree increments, which is fine enough for my work, with a hole marking zero.

Print details

  • 7 mins

  • 1 perimeter (spiral vase)

  • 2 bottom layers

  • no fill

How to use

  1. Load up your filament and print the calibrator. Be sure spiral vase is on!

  2. Clear the print bed in your slicer, then load up your desired model and print settings.

  3. With calibrator in hand, rotate the model in you slicer so that desired colors on calibrator match where they will print on model.

  4. Print.

Tagi