Apple AirTag 2 - Internal Circuit Board (STEP + STL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Accurate 3D model of the 2nd gen Apple AirTag circuit board and antenna bracket
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A 3D model of the internal circuit board from the 2nd generation Apple AirTag, including the plastic antenna bracket it sits on. I made it because I needed accurate gen 2 dimensions for my iPod mods, and figured it would save someone else the trouble.
Overall dimensions are measured from a real unit with calipers. The components were modeled by tracing photos of both sides of the board, and the tiny SMD parts are simplified to keep the file clean. The bottom side is slightly simplified for the same reason. It's meant for fitment and enclosure design, not component level detail.