Airstream Bambi Shade Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are replacement parts for blackout shades for a 2026 Airstream Bambi
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
Nearly half of all our shade toggles broke within two months after purchasing our new Airstream Bambi. As much as we love our Bambi, many of the parts are subpar including the shade toggles. (The Caravel with the same floor plan comes with better quality parts -- thus the higher price tag.) So I created a beefier version.
One of my screw covers also broke when I was fiddling with it, so I created a beefier version of that too.
For completeness I include a STL for the "bell" but you are unlikely to need that.
White PLA worked well for me
Print the toggle on its side at something like 85% fill
For the best looking finish, print the screw cover vertically as shown in the photo.
You will need support.
Use the smallest possible layer height that your printer supports. The front (last few layers to be printed) is slightly rounded so the layers become quite visible. I printed mine with lauyer height of 0.1. It's ok but not great.
I actually printed my parts monogrammed with an "H". The STL files that are included are plain: no embossed letter. But I've include the Fusion 360 files so you have full control. If you want a personalized version, edit using Fusion 360, unsuppress the monogram step, and modify the sketch with any letter you choose.
Mostly I reused the cord that came with original part. This is standard braided shade cord you can steal from some old venetian blinds you might have lying around, or buy some. 1.8 mm works well.
To install the toggle:
Pull the shade down a couple of inches and clip it in place with a clothespin.
Pull off the rubber stopper from one end of the rod,
Twist the old toggle up a quarter turn to unlock it. There is a small hidden dimple that keeps it in place.
Slide the old one out.
Slide the new one into place and turn until you feel the dimple lock back in place.
Replace the rubber end piece.
Done!
To install the screw cover:
Push the old one out from behind by pressing a flat-head screwdriver between the wall and the part. Do not try to pull it out, it will probably break!
Slide the new part into the empty slot.
6 months later, after heavy weekend use, none of the new toggles have broken! I hope it works well for you too.