VESA Laptop Mount - VESA moved to the front (laptop sits further back)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VESA 100 pattern moved 60 mm toward the front lip, so the laptop sits further back on your monitor arm.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of the excellent VESA Laptop Mount by PlasticBurner. The only change: the VESA 100x100 mounting pattern is moved from the back half of the plate to the front half, right next to the lip.
Why
With the VESA plate near the lip, the whole tray (and the laptop on it) sits 60 mm further back relative to your monitor arm. If you tilt the tray so the screen of an opened laptop is vertical, the laptop ends up further away from you and higher.
Example for a MacBook Air 13" M3 (max lid opening about 135°, so the tray is tilted 45°): about 42 mm further away and 42 mm higher than with the original design.
What changed
VESA center moved from 30 mm behind to 30 mm in front of the plate center (60 mm shift).
The cutouts were mirrored together with the holes, so the ribs still run around the screws.
Everything else is identical: 230 x 200 x 7 mm plate, ~20 mm lip, fillets, Ø6 mm through holes with Ø10 mm counterbores on top.
The counterbores are about 6 mm from the base of the lip, so there is still straight screwdriver access.
Files
STL for printing (millimeters).
STEP if you want to modify it further in your CAD.
Hardware
4x M5 screws + nuts, same as the original (about M5 x 12-16 depending on your arm plate).
Printing
Print it flat, bottom side on the bed, lip pointing up, no supports needed. The original author used ABS+, 0.6 mm nozzle, 0.3 mm layers, 3 perimeters, 20% gyroid. PETG or ABS/ASA is recommended over PLA if it sits under a warm laptop.
License: CC BY-NC-SA 4.0, same as the original.