1 / 5
Ender 3/CR 10 + Micro Swiss Direct Drive Dual 40mm Part Cooling Fan Ductinator + Bltouch — zdjęcie 1
1 / 5

Ender 3/CR 10 + Micro Swiss Direct Drive Dual 40mm Part Cooling Fan Ductinator + Bltouch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Thanks for the idea https://www.thingiverse.com/domsche (https://www.thingiverse.com/thing:4284278) - I liked your…

Ocena
0 / 5
Polubienia
1
Pobrania
46
Wydruki
0
Wyświetlenia
704
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Thanks for the idea https://www.thingiverse.com/domsche (https://www.thingiverse.com/thing:4284278) - I liked your bltouch modification but I found that the mount point for the bltouch was too far from the nozzle to be effective in levelling the whole bed. Since I'm using a Micro Swiss direct drive extruder, I think I have more room between the X rail and part cooler, so it's possible to squeeze the bltouch in behind the cooling duct.

These things are under the fans: https://www.thingiverse.com/thing:3624012

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.20

Infill:

25%

Filament: CC DIY PLA Blue


Notes:

I have the following probe offset in Marlin, which seems to work OK:

#define NOZZLE_TO_PROBE_OFFSET { 32, 20, 0 }

I used tree supports in Cura, they weren't too hard to remove.

The instructions from https://www.thingiverse.com/thing:3594440 should be followed for assembly.

Category: 3D Printer Parts

Tagi