Soundcore P30i Gridfinity Cradle – 2×1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact 2×1 Gridfinity cradle designed for the Soundcore P30i/A3959 charging case.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This Gridfinity cradle was designed specifically for the Soundcore P30i/A3959 earbuds charging case.
The case sits upright in four low corner supports, saving drawer space while remaining easy to remove. The centers of all four sides are open, providing finger access and clearance around the charging port and fold-out phone stand.
The uploaded V3 model was refined through multiple physical test prints.
Features
2×1 Gridfinity footprint
Pocket approximately 57.8 × 27.8 mm
Four low corner supports
Open front and rear
Side openings for USB-C access
Rear opening leaves the phone-stand panel unobstructed
No magnets or screws
Prints in the supplied orientation
No supports required
A small fit-test coupon is also included. Print the coupon first if you want to verify compatibility before printing the complete Gridfinity cradle.
Tested print settings
Printer: Original Prusa i3 MK3S
Material: SUNLU Matte PLA
Nozzle: 0.4 mm
Layer height: 0.30 mm
Infill: 10%
Supports: None
Orientation: Flat, as provided
Notes
This model was tested with my Soundcore P30i case. Manufacturing variations, protective covers, or similarly named Soundcore models may affect fit.
The Gridfinity base geometry was generated using kennetek/gridfinity-rebuilt-openscad, based on the original Gridfinity system by Zack Freedman. The underlying library is MIT licensed.