P
Printables
Soundcore Sport X20 case/cover for dust and scratch protection
Should be printed in TPU, default settings are fine, just needs a support for the connector piece in the middle.
Wyniki wyszukiwania: soundcore
Liczymy pasujące modele…
P
Printables
Anker Soundcore Space A80 eartip connector replacement
Tested at 0.06mm, works like a charm
P
Printables
Home Assistant Voice + Anker Soundcore Mini Cube
Short description The built-in speaker of the Home Assistant Voice PE is okay, but with an Anker Soundcore Mini via AUX (3.5 mm jack) it sounds much better. AnkerCube combines both devices into one clean and compact setup with cable…
P
Printables
Anker Soundcore
Are you at a camp and seeking a spot to place your Anker Soundcore? Fear not, this mount is tailored for you. Say goodbye to the requirement of a flat surface. Now, you can effortlessly suspend your Anker Soundcore from a tree! You will…
P
Printables
Soundcore Anker Liberty 4 NC wall mount
Little wall mount for your Soundcore Anker Liberty 4 NC case. Supposed to screw on a wood wall or similar. Print in any material you like. No supports needed. You have to rotate the modell in your slicer.
P
Printables
Soundcore Flare Power Button Replacement
The model still in beta. But works flawlessly with my speaker, any suggestions are welcome Greetings from Argentina
P
Printables
Holder for Anker SoundCore2
I made this model just to put a handle for my Anker SoundCore2. The first one that I printed was too tight to my speaker. But I fixed adding 5 mm on the sides. Still, the print on the image is in that old format.
P
Printables
Soundcore 3 monitor mount
Soundcore 3 top monitor mount - should also work for other sound core / Bluetooth speakers modals and most monitors. printed in E-sun PLA
P
Printables
IKEA Skadis Soundcore 2 Holder
IKEA Skadis Soundcore 2 Holder. Printet with 3 outer layers and 20% infill
P
Printables
Anker Soundcore Mini Phonograph Case
This Case for the Anker Soundcore will redirect your audio and give it a tinny effect, though it won't necessarily amplify it inherently. Cutouts are made so you can still access all ports and buttons. For assembly, you'll need to print…
P
Printables
Soundcore Liberty 4 NC Skadis Holder
Mix both model to a skadis mount. Print with supports. Must print https://www.printables.com/model/283732-skadis-dovetail-peg-system the double. it's a quick n dirty mix in tinkercad.
P
Printables
Charging stand for Soundcore Liberty 4 NC
Angled USB-c cable from Aliexpress: (Modeled for this specific type of cable, other angled cables will not fit!) ----EDIT: OLD LINK REMOVED. I've got word that this cable is no longer available, therefore I deleted the link. I found an…
P
Printables
Soundcore Life Q30\Q35 Part
Soundcore Life Q30\Q35 Part I reinforced it a bit in the most fragile place, as the original part I had broke during installation Category: Audio Video -
P
Printables
Anker Soundcore Life Note 3i Gridfinity bin
2x2 Gridfinity bin for Anker Soundcore Life Note 3i headphone case. Designed to lay flat in a shallow drawer.
P
Printables
ANKER SoundCore Boost Ikea Skadis Shelf
This is a remix of rs6alex 's ANKER SoundCore Boost Stand so that it can be hung up to be displayed on the Ikea Skadis pegboard. Make sure to also print out two universal skadis hooks.
P
Printables
Soundcore Headset Arm
My husband's Soundcore headset broke an arm. I tried printing out an existing model , but realized it was for a different version that uses screws on both ends rather than using plastic hook connectors on one end. So I've modeled this…
P
Printables
Headphone Holder/Mount (Soundcore)
This Minimalistic design uses only around 12g of filament and is ideal for mounting headphones to a wall. A small strip of double sided tape is enough to secure the print onto a surface. The reason for this design is as there was nothing…
P
Printables
Soundcore Liberty 4 NC Ikea Skadis mount
I wanted a mount for my Soundcore earphone case that would allow me to remove the earphones whilst keeping the case held in place. It's a snug fit, so make sure your printer is calibrated well. I used the IKEA Skadis Hook by…
P
Printables
Soundcore 3 Station with Smartphone Holder
My son's Tonie Box was no longer sufficient for his needs (long audio plays, easily switching between tracks, skipping to certain chapters). We therefore opted for a Bluetooth box, the Anker Soundcore 3 and a n old cell phone, which is…
P
Printables
SoundCore Life Q35 - remix to add holes for hooks and reinforced tip
The original part required to remove the hooks in the headset cover, and drill it to use some screws to afix it. I added the holes in the part, so the cover with the hooks can be slide in it, and just use the original screw at the bottom.…
P
Printables
Shower speaker holder Anker Soundcore / Halter für Anker Soundcore in Dusche
This is a holder for the Anker Soundcore to put in the shower. You clip them on the glasscover of your shower as seen on the pictures. You have to print two of them (just multiply the print in your slicer). I put just one in the STL file…
P
Printables
Soundcore 3 riser
This sleek 3D-printed stand is made to elevate your Soundcore 3 speaker for better sound projection and airflow . The design includes clean, minimal lines with slotted grooves to hold the speaker in place. Thanks to the smart geometry and…
P
Printables
soundcore Q20 splint
Apparently many soundcore headphones have a problem of the plastic being brittle and falling apart over time, mine started to crack so I decided to make a small splint to hold them together. Printed on a modified Ender 3 in PLA and 0.2mm…
P
Printables
Soundcore 2 Hanging Case
A remix of a case by Wirthuose for the Anker Soundcore 2. Designed to print in one piece and does not require additional parts. This is my first remix/design. MAKE SURE TO USE SUPPORTS. Raft strongly recommended
P
Printables
Anker Soundcore Q10 Headband Fix
Did the headband on your Anker Soundcore Q10 headphones crack? If so, print this part to cover up that crack. There is no replacement part available from Anker, I contacted them and they said nope. There is a thinner and thicker version…
P
Printables
Soundcore Motion Boom Plus Feet
Anker Soundcore Motion Boom Plus repalcement feet should be printed out of TPU if you want there to be any grip.
P
Printables
Soundcore Sport X20 case/cover for dust and scratch protection
Should be printed in TPU, default settings are fine, just needs a support for the connector piece in the middle.
P
Printables
Soundcore Motion+ Stand
This speaker stand audibly improves the sound quality of the speaker. When placed directly on the desk, the speaker vibrates, which is unpleasant for the musical experience. The model is compatible only with the Motion+ speaker.
P
Printables
Soundcore Sleep A30 Stand
An organizer for 2 roku sized remotes and a pair of Soundcore Sleep A30 earbuds or anything with a similar case.
P
Printables
Soundcore A20i Under Table Mount
Keep your desk clean and your earbuds always within reach! This custom-designed under-table mount for the Soundcore A20i securely holds the charging case while staying hidden under your desk, shelf, or nightstand. Perfect for…
P
Printables
Anker Soundcore Space A80 eartip connector replacement
Tested at 0.06mm, works like a charm
P
Printables
Anker Soundcore 2 and USB cable - Gridfinity Bin
Gridfinity 2x2 Bin: Anker Soundcore 2 + Cable A custom-fit Gridfinity bin designed specifically for the Anker Soundcore 2 Bluetooth speaker. This 2x2 unit keeps your speaker secure and organized on your desk or in a drawer, featuring a…
P
Printables
Soundcore Sleep A30 stand
The uploaded 3mf print is slightly improved from the images. I had made the USB cord slot too small and had to drill it out a bit to salvage the print, and I found myself wishing that I had made the front cavities a little larger. I fixed…
P
Printables
Soundcore Life Q30\Q35 Base Replacement Part
Have a nice day, everyone! Like many other guys, I suddenly found that my headphones were broken. But instead of buying another one, I decided to spend a couple of days creating the spare part. I reinforced it as much as I could and think…
P
Printables
Soundcore Life Q30\Q35 Top Replacement Part
Have a nice day, everyone! I hope all of you enjoyed my replacement base part for Souncore Life Q30/Q35 When I screwed my original top enclouser, I made a mistake and after couple of months, I found cracks on it I fixed it with superglue,…
P
Printables
Soundcore Life Q30\Q35 Reinforcement Clip
Have a nice day, everyone! I hope all of you enjoyed my replacement base part for Souncore Life Q30/Q35 After more than 3 years of using, I found that top of the arm started to crack So, time to new robust design! Did want to create whole…
P
Printables
Anker Soundcore Speaker clips for Citroen 2CV
Printed in PETG, four walls, 30% Gyroid infill. Could probably work with fewer walls, less infill, and in PLA, but I wanted it to be strong. Fits my late-model Citroen 2cv, clips onto the plastic behind the steering wheel. EDIT: Now a…
P
Printables
Home Assistant Voice + Anker Soundcore Mini Cube
Short description The built-in speaker of the Home Assistant Voice PE is okay, but with an Anker Soundcore Mini via AUX (3.5 mm jack) it sounds much better. AnkerCube combines both devices into one clean and compact setup with cable…
P
Printables
Gridfinity Anker Soundcore Sport X20 holder
About This gridfinity holder is designed for the earbuds case of the Anker Soundcore Sport X20. Print instructions Based on one print run: PLA, 0.2 mm, no support.
P
Printables
Anker Soundcore 2 3D scan
Quick test of Einstar Rockit that I've used to scan a Anker Soundcore 2 bluetooth speaker. Figured this might be helpful for anyone still modelling accessories for this legendary speaker. It's not ultra-fine scan, but it's more than…
P
Printables
Inner Swivel Plastic comp. w' Soundcore Life Q35
I don't know if these are compatible with the Q30s. I recommend using supports for the screw holes.
P
Printables
Anker Soundcore Holder
What For use with Anker Soundcore 1 Bluetooth speaker. For the mounting, I used this kind of mounting tape , any tape that has a width of about 30mm and thickness >1mm would work. I don't have the Soundcore 2 so I don't know if it can…
P
Printables
Anker SoundCore Shroud for VW T5 Dashboard Overhead Slot
Surrounds an Anker SoundCore speaker in the storage "slot" above the dashboard of a Volkswagen Transporter T5. It doesn't quite match the corner rounding or "depth" of the speaker, but it still fits really well to cover up the gaps around…
P
Printables
Soundcore Liberty Air 2 QI spacer
This is a booster seat for the Soundcore Liberty Air 2 ear buds case to fit on a QI charger. Specifically I have an Anker PowerWave. This spacer will raise the earbud case 31mm and give it a stable platform
P
Printables
Anker Life Soundcore Q30 headphone band mender
My Q30 headphones, like every over-ear headphone I've had before them, broke after a mere four months of use. Fortunately, the headband has a spring steel structural piece, so I could still use them, but the broken plastic threw off the…
P
Printables
Anker Soundcore and phone caddy
I often carry my soundcore and phone around together so that I can stream content to the speaker. This little caddy makes it easier to do. The soundcore slots into the front part of the caddy, and there's a slot behind it that can take my…
P
Printables
Anker Soundcore Boost Bluetooth Speaker Vertical Stand
I designed this stand for the Anker Soundcore Boost Bluetooth Speaker to be able to sit Vertically, as they work great as a stereo pair. Since the charging port is on the left side I didn't like the fact that it makes the cables look…
P
Printables
Rugged Case for Anker SoundCore
The bumpers need to be in TPU so they will flex over the case and hold it tight. You will need supports for the TPU part. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: Yes Resolution: 200 Infill: 20…
P
Printables
Soundcore Life Q20 - Headband Splint
I love my headphones, but the plastic is brittle and has become broken. Let's keep them going a bit longer by making a splint. This initial approach is very simple, I just took a reference photo and tried to model the inner curve and then…
P
Printables
Anker Soundcore Q20 Headband Reinforcement Splints
Ahh, I love Anker. Well, probably used to. Their quality control has gone way down compared to the first time I've bought their products. Specifically, these pair of headphones, the Anker Soundcore Q20. Lovely pair of headphones, but…
P
Printables
Anker Soundcore Q30 Headphones Hook
This hook is tailored to the geometry of this particular set of headphones, matching the cushion curve and width. Models should be printed in their current, sideways, orientation for strength. Two versions are included to allow the hook…
P
Printables
Anker Soundcore Q30 Headphones Button Extender
This design adds larger buttons to Anker Q30 headphones (transferring presses to the Q30's buttons beneath). The standard ones can be hard to find quickly, especially if wearing gloves. The new buttons can be pressed either axially or…
P
Printables
Soundcore Q30 Protector Clip
Soundcore Q30 headphones sound good but has a poor build quality. The intend of this design is to reinforce broken headphones or protect them against damage. The protector clip may be made longer (or shorter).
P
Printables
Kirby Holder for Soundcore Mini bluetooth speaker
very simple holder that print easily! simply print, paint and use! depending on your printer you might need to add a couple layer of painters tape inside to act as a spacer. it also prevent the speaker from vibrating and making weird…
P
Printables
Anker Soundcore Space NC Headphones
Synopsis The Anker Soundcore Space NC headphones are pretty good. I have had them for a few years. However, the plastic connectors to from the headset to the ear phones are thin and flimsy. Mine broke after a year or so. Since the…
P
Printables
Anker Soundcore Liberty Air gridfinity holder
Designed a gridfinity holder for my Anker Soundcore Liberty Air bluetooth earbuds.
P
Printables
Soundcore life Q30/Q35 - headband piece
After 2 years of use these pieces broke in my headphones. I believe that is a common thing after some time. I created a 3d model to replace the original, and it works great! Probably better printed in PLA for rigidity and in PETG for…
P
Printables
ANKER SOUNDCORE BLUETOOTH SPEAKER MOUNT for L-Track or other single point attachment
This is a small remix of this model which was almost what I needed but not quite. I have a camper van with Adventure Wagon L-track on the walls, and I wanted a way to mount my Anker Soundcore bluetooth speaker to the L-track. I modified…
P
Printables
Anker Soundcore Motion Boom Plus Bumper
The Soundcore Motion Boom Plus sounds great for the price but the build quality is lacking as the entire body is made from hard plastic with zero rubber or silicone. These are lightweight TPU bumpers that can be attached to the ends with…
P
Printables
Anker Soundcore 2 Wallmount
I got tired of my Soundcore boxes lying around, and due to the lack of wall mounts on the internet, I decided to make my own and this is what I came up with. It is printed upright, so no support is needed. The teardrop shaped holes on the…
P
Printables
Soundcore+ Vesa Mount Brackets
Have a laptop that lives on a gas mount VESA arm. Wanted to hang my Soundcore+ speaker from the bottom on the unused VESA mount holes. It's designed to attach to the backside of the VESA mount with a slight angle on it so that the speaker…
P
Printables
Skadis Soundcore Life A1 Case Holder
An Ikea Skadis compatible case holder for the Soundcore Life A1 headphones
P
Printables
Anker Soundcore Q45 headband brace
I purchased the Anker Soundcore Q45s for my son to use in the gym. The headphones are great but the headband is not strong enough for gym use. These allow for strengthening the band. I used black Gorilla tape to adhere the brace to the…
P
Printables
Anker Soundcore Motion Boom Hanger Land Rover Defender Dash
I wanted a sound system in my Land Rover Defender, this would mean buying a MUD centre console, stereo, speakers, new door skins for speaker mounts etc. (or mount them in the headliner). Instead I chose to buy a Bluetooth Anker Soundcore…
P
Printables
Anker Soundcore Life Q10 Monogrammed Name Tag Clip
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) This is a monogrammed tag for an Anker Soundcore Life Q10 bluetooth headset. This was designed in OpenSCAD, and is uploaded as a Customizer, so you…
P
Printables
Anker Soundcore Charging Dock
This is a simple charging dock for an Anker Soundcore Upgraded Speaker . It may also fit the standard model. It uses the stock charging cable and routes through a channel in the back to have the speaker mesh face you while charging. Fit…
P
Printables
Anker Soundcore
Are you at a camp and seeking a spot to place your Anker Soundcore? Fear not, this mount is tailored for you. Say goodbye to the requirement of a flat surface. Now, you can effortlessly suspend your Anker Soundcore from a tree! You will…
P
Printables
Soundcore Liberty 4 Stand
Just a simple but elegant stand to hold the Soundcore Liberty 4 NC earbuds' case. Enjoy! I printed at .08 since I added the text, in the splicer. Otherwise, it should be fine at standard .2, 15% infill. If so inclined to fuel my…
P
Printables
Soundcore motion + support for monitor
I created these support for the ANKER SOUNDCORE MOTION + to attach them on top of a 27 inches monitor. THe monitor is 26mm thick I have attached stl and step files in case you want to modify them.
P
Printables
Anker Soundcore Mini Speaker Case
Case for Anker Soundcore Mini, with opening for controls and two lanyards holes.
P
Printables
Gridfinity - Soundcore A10
A 2x2 grid using the excellent Gridfinity Rebuild OpenSCAD to store Soundcore A10 headphone case. 15% infill, 0.2mm layer height, 0.4mm nozzle
P
Printables
Soundcore Space Q45 headphones cover
better print in vertical position with organic supports
P
Printables
Anker SoundCore ATV mount
Keeps your phone AND the aker soundcore clamped to an 18mm rollbar found on many common atv's (x4) 5mm SHCS are required Holes print to hardware size, just thread them in printed at 50% infill PETG as a minimum
P
Printables
Soundcore Life A1 Magsafe adapter
I suggest printing at 0.1 or less. I did mine at 0.08, 1 wall, 100% and it fits great. The additional grooves are supposed to help with glue overspilling to the sides. I used a basic 2 part epoxy. You should clamp the adapter to the case…
P
Printables
Soundcore Q20i Headphones Hanger for underdesk installation
Soundcore Q20i Headphones Hanger for underdesk installation