Tabletop platen letterpress chases (5x3 and 3x2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable chases for 5x3 and 3x2 model tabletop platen printing presses.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 1
- Wyświetlenia
- 65
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3D printable chases for 5x3 and 3x2 tabletop printing presses.
I have included two versions: one that uses heat-set threaded inserts (similar to how original chases included built-in lockup screws), and plain chases for use with narrow quoins.
For the threaded insert versions, hardware required per chase:
5x3 | 3x2 |
|---|---|
M6 Heated Inserts x4 | M5 Heated Inserts x4 |
M6 Socket Set screw x4 | M5 Socket Set screw x4 |
It is recommended to pre-drill the holes for the inserts after printing and prior to installation for a clean press-fit.
Recommended print settings:
PETG, 6-walls, 45% - 100% infill. No support necessary.