Tabletop platen letterpress chases (5x3 and 3x2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable chases for 5x3 and 3x2 model tabletop platen printing presses.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 1
- Views
- 65
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
3D printable chases for 5x3 and 3x2 tabletop printing presses.
I have included two versions: one that uses heat-set threaded inserts (similar to how original chases included built-in lockup screws), and plain chases for use with narrow quoins.
For the threaded insert versions, hardware required per chase:
5x3 | 3x2 |
|---|---|
M6 Heated Inserts x4 | M5 Heated Inserts x4 |
M6 Socket Set screw x4 | M5 Socket Set screw x4 |
It is recommended to pre-drill the holes for the inserts after printing and prior to installation for a clean press-fit.
Recommended print settings:
PETG, 6-walls, 45% - 100% infill. No support necessary.