Shade for Multi-Directional Ceiling Lamp (Vase Mode Print)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Light shade for ceiling light fixtures with multi-directional exposed bulbs. Prints in vase mode fits on a Prusa Mini.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
I made these simple shades for the light fixture in my apartment rental as they were missing when I moved in.
These print in vase mode so that there isn't a seam- you'll need to figure out how to mount them to your fixture. Mine uses 3 set screws to hold the shade, so I just drilled 3 holes in the base of the shade after printing to make them mount. These fit on a Prusa Mini.
Print settings:
Any material, I used PETG because that's what was loaded in my printer. If your bulbs get especially hot you may want to avoid PLA so that they don't deform from the heat
Vase mode- mine are a single perimeter thick