1 / 4
No Hardware Xshot Thrasher Picatinny Stock Mount — zdjęcie 1
1 / 4

No Hardware Xshot Thrasher Picatinny Stock Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Hardware-less version of @RedCowl 's Xshot Thrasher Picatinny Stock Mount

Ocena
0 / 5
Polubienia
10
Pobrania
9
Wydruki
0
Wyświetlenia
93
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print 1x of everything and 2x of the C Clips. (If a particular attachment does not work please comment so I can fix it)

From @RedCowl 's original post


This should be a simple print, use supports, I prefer the "snug" variety for this model. I have included a 3mf with the parts pre oriented. 

Print this with 5+ walls, and 25%+ infill. Don't want to put force on it and break it in use. Print it like this:

I printing with 4 walls and brick layers, that is an experimental feature available in a custom Orca Slicer Fork called Nanashi. This is the orientation I'd recommend to print in.

Assembly steps:

  1. Take the Left and Right rail pieces and put them on the thrasher

  2. Screw in top screw until gap is closed

  3. Install bottom pin and C Clip

  4. Install top screw C Clip

Tagi