Proto25 XT30, Buzzer and VTX antenna mount - Kayoumini Alternative
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Proto25 two-part rear mount for XT30, buzzer and antenna.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Design
This is a two-part design, with the VTX antenna holder separated from the buzzer and XT30 mount. This makes the parts easier to print and gives you more flexibility.
The buzzer mount is designed for a 9mm buzzer.
The Build
Since the Kayoumini frame is out of stock most of the time, I used the Proto25 frame from ProtoFPV as an alternative, while following the Kayoumini recipe for the remaining components.
This is an DJI O4 Wide build using 15 mm standoffs, with an AUW of 95g including a 420 mAh Flywoo 2S battery. For motors I used the VCI Spark 1103 11000kv.
The printed parts can, of course, also be used with the Proto25 in its intended 4S configuration.
Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee.
Filament : TPU
