Liczymy pasujące modele…
Crashing my Volador VX3 FPV quadcopter repeatedly caused my camera to change angle or get damaged, so I designed this thing. It fits Walksnail Moonlight with filter, or any other 19 mm FPV camera at fixed angle of 30°. Integrated lens…
09.02.2026 Update: add new Front part with new necenano support, which uses low-profile USB-C connector. 18.02.2024 Update: add Base.stl file and upgraded step file In relation to the original model: - the profile of the adjoining surface…
. . . If I saved you time and effort and you feel inclined to throw me a couple bucks for the I spent modeling and actively testing this model my Venmo is (Alex-Garza-48) Thanks !
Crashing my Volador VX3 FPV quadcopter repeatedly caused my camera to change angle or get damaged, so I designed this thing. It fits Walksnail Moonlight with filter, or any other 19 mm FPV camera at fixed angle of 30°. Integrated lens…
V2 Bigger chamfer for switch for easier operation. Bigger yet more elegant holes for better sensor operation and buzzer sound. The back is the same as V1. I liked Alleycat's design and its remix, but wanted more space for Sertec 3000 mAh…
Fits both front standoffs and adjusts perfectly behind the front TPU. The button on the side is ideally positioned for the Vifly Finder 2 Buzzer. Choose between 12.5 or 10 mm as the capacitor diameter size.
This is a fully parametric OpenSCAD model for a standoff mounted buzzer. Currently the file is setup for the Vifly self-powered buzzer and a 5mm standoff. It is designed to be printed in TPU. If you are interested in more parametric FPV…
Quick and dirty model used in order to facilitate the modeling of custom model using this button.
Precision-engineered internal mount for the JHE42B active buzzer, tailored specifically for the GEPRC Mark 5 and PHISITAL Mark 5 frames. Features: Strategic Placement: Fits perfectly in the front section of the frame, tucked behind the…
I use small passive buzzers (12mm diameter) with young people, usually connecting them to a BBC micro:bit (v1) to make sounds and play musical notes. They are very quiet, and I like them that way (don't want 30 loud buzzers going at…
See changelog to see all the updates and changes I did. __________________________________________________________________________ Original Muzi text for his Original H1: Case for the Heltec V3 Lora board. Recommended to print in a Matte…
Print with good quality TPU without supports. I personally add supports manually, to improve the print quality Fits for Foxeer M10Q-180 GPS and any generic buzzer. I have tried with a few no-name buzzers, but I usually use ViFly Finder V2
The Buzzer: https://www.youtube.com/watch?v=-2EKWgTNEYU The Documentary: https://www.youtube.com/watch?v=yxWwBaleuhM From Wikipedia: UVB-76, also known as "The Buzzer", is the nickname given by radio listeners to a shortwave radio station…
Simple design to add a discovery buzzer from hobbyking to a Sky-Hero Anakin. Use two cable ties to lock the buzzer in one of the carbon boom arms of the Anakin.
Este modelo lo realicé con el objetivo de Activar o Desactivar por medio de un switch el zumbador, por si se requiere o no que la puerta emita el sonido al abrir, retroalimentado por medio de un sensor magnético. La luz led indica si el…
09.02.2026 Update: add new Front part with new necenano support, which uses low-profile USB-C connector. 18.02.2024 Update: add Base.stl file and upgraded step file In relation to the original model: - the profile of the adjoining surface…
Rekon 7 HD pro Buzzer and XT60 mounts for that https://youtu.be/TbkZb6YF4V8
After reading a great tip by 8Bit_koopa in the Flitetest Forums http://forum.flitetest.com/showthread.php?33056-Flitetest-DIY-Gremlins&p=351391&viewfull=1#post351391 I decided to modify my original Femto F3 Camera Mount to add the sweet…
I needed a way/place to mount the Vi-Fly Finder 2 to my GepRC Moz7 frame. I recreated the front antenna mount that slides/snaps onto the carbon fiber frame peg thing and it still will house the antenna, but also has a box to put the…
Fits Vifly Finder 2 Fits Capacitors ⌀12mm±0.2mm; max length 31mm Probably fits the Syncmode as well. Just mind the camera angle.
This funny little project helps to clarify the most important question: Who was first? With real quiz buzzer features, like: First answer locks the other buzzers Indication of fastest buzzer - with light and sound effects Easy unlocking…
1U Rack mounted temperature & humidity sensor + smoke sensor & buzzer. Uses ESPHome to send data to HomeAssistant, but can work also without a network. Mounted to the right side rail. Needs right angled micro usb cord to power, straight…
Horn for small buzzers, commonly 5v or 12v. This makes these small buzzers significantly louder. Example buzzer: https://thepihut.com/products/buzzer-5v-breadboard-friendly Two buzzer diameters available - 9.25mm and 12mm. Buzzer…
suite a une demande , j'ai mis a jour mon tpu pour le jeno 3 , tpu pour le buzzer vifly finder mini et les antenne du dji 04 …. je n'ai pas tester le print ! si des beta testeurs veulent essayer ! le voici a disposition …
Geprc / Phisital mark5 Buzzer holder ver1, ver2, ver3. Printed in TPU 95A.
Case for Heltec WiFi LoRa 32 V3 This case is designed for the Heltec WiFi LoRa 32 V3 and includes the following components: Included Components: GPS Module (NEO-6M or GT-U7) On/Off Switch (S3P = SRS3P, 19.4 x 5.6 x 5mm) → Link GY-BME280…
This 3mm wider case is a remix from the genious original “RAK Meshtastic Starter Kit - No Additional Hardware Case” from pdxlocs. I also used two other remixes here for the frame and the front and back cover. The frame can hold the GPS…
These are accessories for the GepRC Tern LR40 drone. The Fusion 360 model files are included to allow modification for other quadcopters, buzzer sizes, or antenna arrangement. Prints are made from TPU to allow flexibility for parts…
Printing Recommendations: Use adaptive layer heights (up to 0.2mm max) for optimal surface quality and faster print times. Tree supports recommended for clean and easy support removal. Components: Heltec LoRa32 V3 NEO-6M GPS Module…
There was an unused mounting spot on the back of the frame, I think maybe for a VTX antenna, but since I used a different mount for the lollipop, I figured I could put a buzzer there. I printed in TPU and used 2mm screws to affix it to…
Holds the common LiPo-checker on the LiPo battery with one of the battery straps as seen on the picture. Hope you enjoy it and keep some old brushed RCs alive without the risk of ruining your LiPos.
Mount base for the ZE08-CH2O formaldehyde sensor and optional Buzzer module designed to be used with the 3D Printer Emission Sensor Array (SensorBox V2) . The original design attached the sensor directly to the carrier module using…
This is an easy way to use small buzzers in big electronics bays. Meant to be used with 35mm DIN railing. First, you put two wires through the two holes inside the pocket, and you have to solder them to the buzzer's pins. After, you pull…
Designed for the buzzers with a diameter of 89mm. Affiliated link for the dog buzzers used: https://amzn.to/3FT7L2L
Cover for selfmade buzzer. d1mini case: https://www.printables.com/model/327559 parts: pcb: D1mini prototype board https://de.aliexpress.com/item/1005008599632550.html transsistor BC547:…
This is a 3D-printed enclosure for a simple but functional Arduino-based timer project. It includes space for an Arduino Uno, a buzzer, three buttons, and a digital LED display. This project is perfect for beginners who are just getting…
Print tips: Lay the faces of the surfaces flat on the build plate. If you have a well dialed in printer you will not need to use supports. If you don't, use tree supports. Please see the readmes in the original. You may want to increase…
buzzer mount BEYONDSKY 7 inch frame or others with 25mm width holes https://youtu.be/HFuLS_cYZcg
Mount for 12mm diam. piezo buzzer. Print Settings Printer: CTC 3D Rafts: No **Supports:** No Resolution: 0,15 **Infill:** 50 Category: R/C Vehicles
I got the Mod Shot Timer, and while its loud buzzer is ideal for the range, it’s a bit too intense for home practice—especially for my pets. This compact Muffler, printed with TPU, helps tone down the sound, making dry fire training at…
Sturdy enclosure for a 100mm arcade button, useful for arcade games, quiz night buzzers, etc. Designed to be strong and survive heavy use. Can sit flat on a table, or mounted if needed (we chose to mount to a tripod during events). Also…
I wanted some kind of alarm to let me know when it was time to do a filament change on my Ender-3 S1 Plus because I would not hear it when it was time or wasn't paying attention and it would mess up whatever I was trying to print and…
version 2 of my chainsaw gun for Buzzer Gi joe classified
These are TPU for the Jeno 5.1" Fit. One for the GPS, the other for the Condo+Nano Buzzer and the third for the fun…
. . . If I saved you time and effort and you feel inclined to throw me a couple bucks for the I spent modeling and actively testing this model my Venmo is (Alex-Garza-48) Thanks !
Here is a pretty case for the famous VIFLY Beacon buzzer Simply inspired by some 3D printing products from fpv shops I added a small hole to better see the LED inside (even if you choose a dark filament). I use the Bambulab TPU for AMS…
Mount for Mateksys loud buzzer , just behind the camera. print with any material. Any feedback is appreciated!
Photobooth Buzzer A buzzer based on the ESP32. It connects to the photobooth system via bluetooth and emulates a keyboard to trigger captures remotely. Made for the photobooth-app but could be used universal if all you need is a keyboard…
V2 Bigger chamfer for switch for easier operation. Bigger yet more elegant holes for better sensor operation and buzzer sound. The back is the same as V1. I liked Alleycat's design and its remix, but wanted more space for Sertec 3000 mAh…
Tiny Whoop Build Up STL Objects: Canopy Camera Mount Buzzer Holder E010 Camera Mount Canopy is very thin so removing support is a precise work. I was successful right after print. Some parts of objects are bend after print with a help of…
protection lipo pour stingerbee en O3 pour integrer un buzzer et un GPS
Mount for GPS module nano and Buzzer jhe42b-s. Pavo Femto\pico
I bout an big emergency button and wanted to use this as a button in home assistant. The easiest way I found was to integrate an small button inside it. The recreate to need a the big button: My model is from ENMG. Buy an “Auto Reset”…
I created this model after I was presented with Anycubic Kobra S1 on my anniversary and was straggling with what to make using this beautiful device. I used Tinkercad and my basic DIY experience in electronics and SOC programming to…
Wall plate to hold electronic Piezo buzzer ( https://a.co/d/9ASUl6I ). Has two insets on back for command strips.
Mounting slot for installing the standalone JHEMCU 42B_S buzzer instead of the stock beeper I’m ready to help with whatever you need—questions, explanations, ideas, or anything else. What would you like to talk about or ask? Or if you’d…
TPU mounts for a ~10mm x 10mm buzzer and ~10mm x 25mm capacitor. Both fit on 5mm x 25mm standoffs. The capacitor mount features a tie-wrap passthrough for capacitor security. I recommend installing a B2FPV Capacitor Cap and placing the…
This is an optional add-on for my SpeedyBee Mario 5 Custom TPU Mount . It is designed to securely hold a VIFLY Finder 2 Buzzer (100dB) . Compatibility: Fits perfectly underneath the GPS/Antenna module of my main SpeedyBee Mario 5 mount.…
Fits both front standoffs and adjusts perfectly behind the front TPU. The button on the side is ideally positioned for the Vifly Finder 2 Buzzer. Choose between 12.5 or 10 mm as the capacitor diameter size.
This buzzer is one of a number of models which turn a magnetic tile ball run tiles into a first batteries-bulbs-buzzers-and-buttons electronics kit connected up with banana plugs. In addition to the printed parts, you will need: 1x…
This is a fully parametric OpenSCAD model for a standoff mounted buzzer. Currently the file is setup for the Vifly self-powered buzzer and a 5mm standoff. It is designed to be printed in TPU. If you are interested in more parametric FPV…
Quick and dirty model used in order to facilitate the modeling of custom model using this button.
This is a simple buzzer device for use with the repeatable CNC origin fixture here: https://www.thingiverse.com/thing:7301429 It requires the following materials: 9V Battery 9V Battery Connector ( https://a.co/d/0dfPKkh2 ) 220 ohm…
Originally, I had ziptied the buzzer to the red TPU canopy cover in my mob8, but it was't ideal so I came up with a 3d printed holder. It's press fit and the inner hole has 11.8mm clearance, so feel free to resize it in slicer if yours…
Hi! This buzzer holder has to be installed behind the fpv cam, on the standoffs of the TBS source one V5 frame. Print in TPU, 100% infill, no support needed. Edit: Thanks to Talhah remarks on his remix (…
This is a simple backplate for the Transtec Frog quad frame to mount a buzzer / led combo. Fixed to frame with two M2.5 screws. Buzzer is glued on. I added the OpenSCAD file for further editing. Category: R/C Vehicles
Precision-engineered internal mount for the JHE42B active buzzer, tailored specifically for the GEPRC Mark 5 and PHISITAL Mark 5 frames. Features: Strategic Placement: Fits perfectly in the front section of the frame, tucked behind the…
Parametric buzzer mount for a tiny whoop. Pictured is my HDZero M8. The groove of the buzzer is used to hold it in place. Many parameters are adjustable and two different bracket styles are provided. If you really wanted to, you can get…
English: This is a refined buzzer holder for GEPRC Mark 5 and Phisital Mark 5 frames, specifically designed for the JHE42B buzzer. Key Improvement: The main feature of this model is the top safety bridge . It serves two critical purposes:…
Holder for circular restaurant pagers used in restaurants, food courts, and takeout services. Designed to keep pagers organized and easy to access while reducing counter clutter. Easy to print and suitable for commercial or personal use.…
Кронштейн под автономный бузер JHE42B для Pavo 20 (обычная версия) с вырезом для конденсатора. Рекомендую печать PETG или TPU. В 3MF мой профиль печати для PETG. Поддержки не требуются, если печатаете моим профилем. -- Bracket for JHE42B…
This enclosure is designed for DIY clock and display projects using a TM1637 4-digit LED display and a Wemos D1 R1 (ESP8266) development board. TM1637 modules are commonly used for digital clocks and numeric displays with ESP8266-based…
WLAN Auslöser für Photobooth /Fotobox Dieser individuell entwickelte Fotobox-Buzzer wurde auf Grundlage einer bestehenden Vorlage von mir neu konstruiert um diverse Bauteile unter zu bringen. Er dient als praktischer und zuverlässiger…
A lightweight and clean-mount solution for the OasisFly35 , designed specifically for 9mm active FPV beepers . This mount provides a secure fit while keeping the beeper protected and easily accessible. It integrates neatly with the frame…
This Object lets you mount a FrSky XSR and a buzzer on the Lumenier QAV-Skitzo Dark Matter. Printed in TPU (NinjaFlex) for maximum durability and also to be able to fixate the buzzer (press fitting). Other things for the Lumenier…
This module is my first Thingiverse project inspired by OsiViper's antenna mount. It is designed to hold the FrSky R-XSR receiver with a bit of foam or double sided tape underneath as well as a buzzer and microphone. I also have a version…
My washer/dryer doesn't have a buzzer to let me know when its done. I've setup a RPi Zero to make a noise and send an alert to my phone when it is finished. I remixed the case to house the buzzer and the vibration sensor which is stuck to…
I like the Vifly Finder 2 Buzzer for being cheap, functional and reliable as far as I can tell Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: SainSmart TPU emerald Notes:…
Got a TBS Unifi from a buddy, nice gift :) And was using the org design and liked it. So started on this, while working on it remembered I had a LED buzzer combo from an old Storm X2 and popped it in there as well. I need to work on the…
Système de buzzers pour le jeu de société burger quiz Éléments requis : Colle pour les pattes permettant de fermer les burgers Ressort a mettre sur l'axe central Bouton poussoir LEDs Arduino nano
Quick Edit with Tinkercad adding a mount for a VIFLY buzzera 13mm Capacitor with space for a Skystars ELRS RX under the cap https://www.tinkercad.com/things/8fE27xkF3Dk
Realacc XS220E Rear Mount for LanTian 2 in 1 WS2812B LED And 5V Active Buzzer Buzzer + LED board Amazon link: https://www.amazon.com/gp/product/B019UVHWMS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 Category: R/C Vehicles
PC / Mining RIG Power Button / Reset / Buzzer / LED holder panel 5mm LED Use filament 1,75 mm for holding button in place or glue M3 Nut holder in 3 direction PC / Mining RIG Power Button / Reset / Buzzer / LED holder panel 3mm LED…
nazgul xl5 mount crossfire buzzer gps PS. Mogę wydrukować i wysłać na terenie Polski.
Have been working on this clock for a little while and needed an enclosure, and this one does the job very nicely (thanks to creator), and I used part of the Desktop widget clock for the screen insertion into the face (again, thank you).…
I made 3D printed, Bluetooth connected, game show buzzers for playing The Voice at home, powered by Adafruit Circuit Playground Bluefruit boards and a laptop. Find the full story including build instructions in my blog post . Here it is…
Originally designed this as an emergency stop for my router then printed three more for a school quiz show. Fits standard MX Switches.
A buzzer bracket to complement the m-Bitbeam construction set . Sockets for m-bitbeam and kbricks are included. Eine Summerhalterung als Ergänzung zum m-Bitbeam-Bausatz . Sockel für m-bitbeam und kbricks sind enthalten.
Used to mount 5 headlight that replaces stock headlight. Also acts as a front kickstand. Print in TPU. Remix of https://www.thingiverse.com/thing:5430088
Camera mount for the Insta360 SMO 4K fitting on an ImpulseRC Micro Apex and a tail mount for a buzzer (use heat shrink to attach).
![Parametric Whoop Buzzer Mount [OpenSCAD]](https://media.printables.com/media/prints/ffb327b9-f9e8-4d0e-93eb-b0343fdae3fa/images/12831332_8ff889a4-402a-493e-b790-61e405065a61_a4799c48-90ed-4955-a74a-f2c3e71531bf/cover.jpg)
