RAK Meshtastic Starter Kit - with GPS and buzzer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix from the original "RAK Meshtastic Starter Kit - No Additional Hardware Case" for use with GPS addon
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 470
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This 3mm wider case is a remix from the genious original “RAK Meshtastic Starter Kit - No Additional Hardware Case” from pdxlocs.
I also used two other remixes here for the frame and the front and back cover.
The frame can hold the GPS antenna and the front and back covers are flat and without pattern and also got cutouts for the GPS antenna and also the buzzer. I also added a small part for stability improovement.
The lid is available with and without hole.
The buzzer module is placed in slot “C” instead of the acceleration module which i removerd. Unfortunately, the buzzer is very quiet and hard to hear.
Printed in white PLA on Anycubic i3 mega S without support.