Caddx GM3 Gimbal Adapter for Qromer Arrowshaft SlowStick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter plate betwwen my Caddx GM3 gimbal mount and the Arrowshaft Slowstick by @Qrome.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is an adapter plate betwwen my Caddx GM3 gimbal mount (https://www.printables.com/model/1864926-caddx-gm3-gimbal-and-walksnail-20mm-vtx-mount) and the Arrowshaft Slowstick by @Qrome (https://www.printables.com/model/759660-slow-stick-fpv-plane-with-carbon-fiber-arrow-shaft). It is designed so that the GM3 gimbal mount can be moved between models while leaving the Slowstick Adapter in place.
There are two slots to zip tie the adapter to the arrow shafts.
You will need 4 off M3 x 5 heat set brass inserts.