1 / 1
Caddx GM3 Gimbal Adapter for Qromer Arrowshaft SlowStick
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter plate betwwen my Caddx GM3 gimbal mount and the Arrowshaft Slowstick by @Qrome.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is an adapter plate betwwen my Caddx GM3 gimbal mount (https://www.printables.com/model/1864926-caddx-gm3-gimbal-and-walksnail-20mm-vtx-mount) and the Arrowshaft Slowstick by @Qrome (https://www.printables.com/model/759660-slow-stick-fpv-plane-with-carbon-fiber-arrow-shaft). It is designed so that the GM3 gimbal mount can be moved between models while leaving the Slowstick Adapter in place.
There are two slots to zip tie the adapter to the arrow shafts.
You will need 4 off M3 x 5 heat set brass inserts.