1 / 3
Trombone Pencil Holder / Portalápices para Trombón (16mm) — zdjęcie 1
1 / 3

Trombone Pencil Holder / Portalápices para Trombón (16mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A handy snap-on pencil holder designed specifically for 16mm trombone tubing. / Portalápices a presión para tubería de t

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
17
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial

### 🇬🇧 English Description

Do you always forget to bring your pencil to rehearsals? Here is the perfect solution!

This functional 3D-printed clip is specifically designed to attach a pencil directly onto the 16mm tubing of a trombone. It features a secure, low-profile snap-on mechanism that ensures your pencil stays firmly in place while you play, carry, or store your instrument.

No more digging through your case or interrupting rehearsals to look for a pen!

#### 🔧 Print Settings & Recommendations

* Material: PETG or PLA (PETG is highly recommended for its better flexibility and durability over time, ensuring the clip doesn't lose tension).

* Layer Height: 0.2 mm or 0.16 mm for a cleaner finish.

* Infill: 15% - 20% (Grid or Gyroid).

* Supports: No supports needed! It prints easily in the original orientation.

* Perimeters/Walls: At least 3 walls to ensure the snap arm is sturdy enough.

If you have any questions, feel free to leave a comment below. Happy printing and rehearsal!

---

### 🇪🇸 Descripción en Castellano

¿Siempre se te olvida llevar el lápiz a los ensayos? ¡Aquí tienes la solución ideal!

Este práctico clip impreso en 3D está diseñado específicamente para acoplarse directamente a la tubería del trombón de 16mm. Su mecanismo a presión sujeta el lápiz de forma firme y segura, evitando que se caiga durante el uso, transporte o guardado del instrumento.

¡Se acabaron los problemas de buscar un lápiz a última hora o interrumpir el ensayo!

#### 🔧 Parámetros de Impresión Recomendados

* Material: PETG o PLA (Se recomienda PETG por su mayor flexibilidad y durabilidad a largo plazo para los brazos de presión).

* Altura de capa: 0.2 mm o 0.16 mm para un acabado más limpio.

* Relleno (Infill): 15% - 20% (Patrón Giroide o Rejilla).

* Soportes: No requiere soportes. Se imprime fácilmente apoyado en la base.

* Perímetros/Paredes: Mínimo 3 perímetros para asegurar la resistencia mecánica del clip.

Si tienes cualquier pregunta acerca del diseño o necesitas alguna adaptación, házmelo saber en los comentarios.

Tagi