1 / 3
Caddx GM3 Gimbal and Walksnail 20mm VTX Mount — zdjęcie 1
1 / 3

Caddx GM3 Gimbal and Walksnail 20mm VTX Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount for Caddx GM3 Gimbal and Walksnail VTXs with 20mm hole spacing (E.G. the Moonlight)

Ocena
0 / 5
Polubienia
2
Pobrania
21
Wydruki
0
Wyświetlenia
100
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

This is a mount for Caddx GM3 Gimbal (V1 & V2) and any Walksnail VTXs with a 20mm mounting hole spacing (E.G. the Moonlight)

There are two versions based on the height offset: 3mm & 12mm.  It can be mounted either sitting or hanging and with single or dual antennas.

The gimbal is mounted using 4 of the M2 screws that are supplied in the box and you will need another 4 to mount the VTX.

There is a dedidcated model for the Caddx Ascent Lite+ VTX at (Under Construction)

It was orginally designed to fit on Qromer's arrowhaft Slowstick RC aircraft (https://www.printables.com/model/759660-slow-stick-fpv-plane-with-carbon-fiber-arrow-shaft) using my adapter https://www.printables.com/model/1864863-caddx-gm3-gimbal-adapter-for-qromer-arrowshaft-slo

Tagi