Caddx GM3 Gimbal and Walksnail 20mm VTX Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for Caddx GM3 Gimbal and Walksnail VTXs with 20mm hole spacing (E.G. the Moonlight)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is a mount for Caddx GM3 Gimbal (V1 & V2) and any Walksnail VTXs with a 20mm mounting hole spacing (E.G. the Moonlight)
There are two versions based on the height offset: 3mm & 12mm. It can be mounted either sitting or hanging and with single or dual antennas.
The gimbal is mounted using 4 of the M2 screws that are supplied in the box and you will need another 4 to mount the VTX.
There is a dedidcated model for the Caddx Ascent Lite+ VTX at (Under Construction)
It was orginally designed to fit on Qromer's arrowhaft Slowstick RC aircraft (https://www.printables.com/model/759660-slow-stick-fpv-plane-with-carbon-fiber-arrow-shaft) using my adapter https://www.printables.com/model/1864863-caddx-gm3-gimbal-adapter-for-qromer-arrowshaft-slo