COCA COLA PALLET COASTER [MULTI-COLOUR]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bring a rustic, industrial vibe to your desk with the COCA-COLA mini pallet coaster. Designed with an authentic texture.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
⚙ Realistic Wood Grain Coca-Cola Pallet Coaster
Bring a rustic, industrial vibe to your desk designed with an authentic textured wood grain finish, these coasters look and feel like genuine scaled-down wooden pallets. Designed specifically to fit all standard cans, this model features the iconic logo allowing vibrant colours to pop.
⚙ Features
Multi-Colour: Pre-set and optimized for Multi and AMS units.
Realistic Texture: Detailed wood grain finish built directly into the surface geometry.
Fully Customizable: Easily assign different colours to individual parts for custom multi-colour combinations.
Easy Print: Select your filament colours and print
⚙ Slicer & Print Settings
Layer Height: 0.20mm (or 0.16mm for higher detail)
Wall Generator: Arachne (Recommended) or Detect Small Walls enabled
Infill: 15–20% (Grid / Gyroid)
Supports: None required
⚙ Important Slicer Settings
⚠ Important Slicer Setting: You must set your Wall Generator to Arachne or enable Detect Small Walls in your slicer settings. This ensures fine geometry and thin wall details slice correctly without leaving missing paths or gaps.
⚙ Print Settings & Profiles
Filament Type: PLA or PETG (PETG is recommended if you frequently use it for hot drinks or want extra washability)
Layer Height: 0.2mm (Standard) or (0.16mm for higher detail)
Infill: 15% (Grid/Gyroid)
Walls/Perimeters: 3 walls for clean, solid edges around the logo cut-outs.
Supports: None required! The underside logo and top cut-outs are designed to print perfectly flat on the build plate.
⚙ How to Customize Colours
Open the project in You're Slicer
In the left panel, switch from the Global tab to the Objects tab.
Expand the coaster assembly to view individual parts.
Select individual objects/parts and assign your desired filament colour slot
(or right-click → Change Filament).
⚙ Note
Adhesion: Please ensure your bed is clean and well-levelled for the perfect first-layer finish.
If you enjoy this print, please consider sharing a photo and leaving a comment and like!
I cant wait to see how yours turns out!