Pitot 4525 I2C wing mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your Pitot tube and electronics directly under the airplane's wing
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I don't have a link to the Pitot tube I used; it's an old, secondhand model.
Mounting the PCB Holder:
- Cut out the space for mounting the Pitot electronics box using the template
- Cut a slot in the wing to route the Pitot tube wire to the fuselage
- Glue the Pitot PCB housing into the wing
- Insert the PCB and route the wires
- Put the cover on and secure it with screws; I used two M2x6 screws
Installing the Pitot tube mount:
- Press the printout against the spot where you want to mount the bracket
- Lightly cut the marks with a scalpel
- Screw the Pitot tube onto the mount
- Apply adhesive (I used a two-part epoxy) to the printed element
- Insert the print into the cut-out
- Route the flexible wires from the Pitot tube to the electronic module
Airplane is FMS PA-18 1700mm:
https://aliexpress.com/item/1005004086841313.html
Check out my FPV mod for this airplane: