Pitot 4525 I2C wing mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount your Pitot tube and electronics directly under the airplane's wing
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I don't have a link to the Pitot tube I used; it's an old, secondhand model.
Mounting the PCB Holder:
- Cut out the space for mounting the Pitot electronics box using the template
- Cut a slot in the wing to route the Pitot tube wire to the fuselage
- Glue the Pitot PCB housing into the wing
- Insert the PCB and route the wires
- Put the cover on and secure it with screws; I used two M2x6 screws
Installing the Pitot tube mount:
- Press the printout against the spot where you want to mount the bracket
- Lightly cut the marks with a scalpel
- Screw the Pitot tube onto the mount
- Apply adhesive (I used a two-part epoxy) to the printed element
- Insert the print into the cut-out
- Route the flexible wires from the Pitot tube to the electronic module
Airplane is FMS PA-18 1700mm:
https://aliexpress.com/item/1005004086841313.html
Check out my FPV mod for this airplane: